<![CDATA[SoliForum - 3D Printing Community — XYZWare vs. XYZWare Pro]]> 2020-04-08T12:26:10Z PunBB https://www.soliforum.com/topic/18514/xyzware-vs-xyzware-pro/ <![CDATA[Re: XYZWare vs. XYZWare Pro]]> Sealing it up to keep it warm shouldn't be a problem but why do they specifically sell it for ABS?

In any case, I still would like to know how to get the pro version working again. There must be some way of tricking it to not look at the printer type.

]]> https://www.soliforum.com/user/23923/ 2020-04-08T12:26:10Z https://www.soliforum.com/post/152946/#p152946 <![CDATA[Re: XYZWare vs. XYZWare Pro]]> That machine is only designed for PLA. Unless you can seal the enclosure and keep the inside very warm you will not be able to use ABS.

]]> https://www.soliforum.com/user/7731/ 2020-04-08T11:19:03Z https://www.soliforum.com/post/152943/#p152943 <![CDATA[XYZWare vs. XYZWare Pro]]> I have a 1.0 AiO and am not very happy with ABS prints. Layers tend to separate on larger parts. I know I can port the machine to another firmware but I don't want to lose the scanner. I've been able to improve a little using the trainer http://www.soliforum.com/topic/ … e-trainer/ hack. I also downloaded the pro version of XYZWare and was able to print a part once. The odd thing is, it ignored the fact that I don't have a pro machine the first time but after that, it refused to print throwing a wrong machine signature error. The print that came out was, however, better than those from the normal slicer. So, I have two questions:

Other than the better parameter control, what is the difference between pro and normal versions?

How can I make the pro version ignore my printer type and just get on with it?

Thanks.

]]> https://www.soliforum.com/user/23923/ 2020-04-08T10:28:12Z https://www.soliforum.com/post/152942/#p152942