<![CDATA[SoliForum - 3D Printing Community — Help: Davinci XYZ 1.0 e3d offset problem]]> 2020-05-05T02:24:22Z PunBB https://www.soliforum.com/topic/18512/help-davinci-xyz-10-e3d-offset-problem/ <![CDATA[Re: Help: Davinci XYZ 1.0 e3d offset problem]]> Take a look at the Z-Axis extension for DaVinci Pro 3in1 and E3DV6 Hotend on Thiniverse; https://www.thingiverse.com/thing:4021276.

This slip-on extension will lower the print bed on the ZED Axis to permit reasonable distance settings in the Z-Axis offset configured via the LCD menu/settings interface.

This will also reduce the maximum height of any print job by approximately 5-10mm depending upon the accumulated physical & printer configured ZED offset.

]]> https://www.soliforum.com/user/24250/ 2020-05-05T02:24:22Z https://www.soliforum.com/post/153211/#p153211 <![CDATA[Re: Help: Davinci XYZ 1.0 e3d offset problem]]> i would adjust the z  axis home stop. if you can do not know davincis

]]> https://www.soliforum.com/user/6775/ 2020-04-07T10:36:25Z https://www.soliforum.com/post/152934/#p152934 <![CDATA[Help: Davinci XYZ 1.0 e3d offset problem]]> Hi all, i'm kinda stuck..

I have upgraded my head to an e3d nozzle and now it is way too low. I measured about 18mm. The hardware installation went well but i am having major issues with the height.

I have repetier and am having issues on where and how to set the height or the z offset. Whatever i try it keeps hitting the bed no matter what. I'm stuck sad


Can anyone help me out?

]]> https://www.soliforum.com/user/23992/ 2020-04-07T07:51:20Z https://www.soliforum.com/post/152931/#p152931