<![CDATA[SoliForum - 3D Printing Community — Yet another Carriage for the DV 1.0]]> 2020-02-07T06:59:25Z PunBB https://www.soliforum.com/topic/18420/yet-another-carriage-for-the-dv-10/ <![CDATA[Yet another Carriage for the DV 1.0]]> Picked up a DaVinci 1.0   from the tip shop for 10$, thinking will be good for parts.
After cleaning dried gunk from the slide bars & lubing it is jogging perfectly.
Main board says 08-2014, it has about 130 hours on the log.
Missing the hot-end & after much researching I'm glad it is.

I'll do a firmware mod initially & change to a Ramps 1.6 board  later on.

I'm used to subtractive mfg, cutting chips at 12krpm so looking forward to additive making things.

I have made a model in rhino for a new carriage, first I used SC08 bearings but they are a bit chunky for the small carriage but easy to fit, decided on SF-1 0815 Teflon lined plain bearings cheap & common.
It is designed to be made with a cutting CNC machine as I don't have a working 3D printer.
I plan to fit the stepper/filament feeder on the shelf where there are already Nema 17 mounting holes.

would appreciate any comment as it is wip prototype.

]]> https://www.soliforum.com/user/23524/ 2020-02-07T06:59:25Z https://www.soliforum.com/post/152550/#p152550