<![CDATA[SoliForum - 3D Printing Community — Question]]> 2019-12-29T21:14:22Z PunBB https://www.soliforum.com/topic/18355/question/ <![CDATA[Re: Question]]> danijelfurjan3 wrote:

i have a stl of that but the writer is still running at 210, not changing the temperature ..


You have to have software that allows you to program temp changes at various levels. The software your machine runs on does not allow this nor can you change the temps unless you change the controller to something like a Ramps 1.4. On your machine the fialment chip sets the temp and it is controlled by the color.

]]> https://www.soliforum.com/user/7731/ 2019-12-29T21:14:22Z https://www.soliforum.com/post/152278/#p152278 <![CDATA[Re: Question]]> i have a stl of that but the writer is still running at 210, not changing the temperature ..

]]> https://www.soliforum.com/user/22725/ 2019-12-29T15:07:48Z https://www.soliforum.com/post/152275/#p152275 <![CDATA[Re: Question]]> You need the stl of that then put it into your slicer/host program and have the slicer send it to the printer.

]]> https://www.soliforum.com/user/7731/ 2019-12-28T18:35:07Z https://www.soliforum.com/post/152267/#p152267 <![CDATA[Question]]> http://soliforum.com/i/?ev1pf5Z.jpg



through which program to inject this so I can test the temperature

]]> https://www.soliforum.com/user/22725/ 2019-12-28T10:05:19Z https://www.soliforum.com/post/152266/#p152266