<![CDATA[SoliForum - 3D Printing Community — Workaround for emutag/paper tags on latest FW (tested on Mini W)]]> 2019-11-30T11:07:06Z PunBB https://www.soliforum.com/topic/18314/workaround-for-emutagpaper-tags-on-latest-fw-tested-on-mini-w/ <![CDATA[Workaround for emutag/paper tags on latest FW (tested on Mini W)]]> Hi all

I stupidly updated my Davinci Mini W to the latest FW, this caused all non genuine NFC cards to throw up an error and not print.

After trying many new UIDs and tags it was looking like I needed to downgrade the FW, the latest FW blocked the use of modfreakz flasher, so I ordered a J-Link EDU mini.

I was sitting thinking about an old post I read about the printer being able to boot an old FW if you held the front button and powered on. (sorry cant remember who posted this info, but thanks).

I did this and the flasher reported a fw of 1.0.1 so I selected 1.2.3 and flashed it as an upgrade.

Now all my tags are working again and can finally print.

edit - It seems all tags that the printer tried while on the updated fw are still blocked! but new UIDs are woring fine

]]> https://www.soliforum.com/user/15619/ 2019-11-30T11:07:06Z https://www.soliforum.com/post/152029/#p152029