SoliForum - 3D Printing Community — g code

Re: g code

2019-11-23T16:40:43Z

gremlins ??

Re: g code

2019-11-23T15:11:56Z

it's fine now, i started it all over again and it's fine, it's working fine for a full 4 hours

Re: g code

2019-11-23T12:30:24Z

you have a davinci . the layers are shifting . look or mechanical issues

Re: g code

2019-11-23T10:13:55Z

Look

now after reinstallation, the layer escapes, and if everything is fine .. what's going on

I use a magnet pad, it's not up to the pad because it holds up well, just the printer screws something up

Re: g code

2019-11-23T09:58:57Z

I installed again, and now the g code is fine, something I probably changed in the settings ..

Re: g code

2019-11-23T09:51:03Z

yes, but it happens to me when i cut something, as if the maker was broken, until the next day everything was fine, i'll try uinstall and let me know.

Re: g code

2019-11-22T22:56:22Z

Just because an object is on the web does not guarantee it can be printed.

Re: g code

2019-11-22T20:48:32Z

Those appear to be separate parts embedded into the main body. Maybe the creator of the part tried to correct something. But the slicer is seeing those as separate parts and giving them their own perimeter and infill.

You might be able to take the part and run it through netfabb to have it corrected.

g code

2019-11-22T20:43:38Z

why is this happening to me .. Put on a layer more, and then my subject is hunchy ... Let me mention everything is so, and taken off the net, and we do it manually ..