<![CDATA[SoliForum - 3D Printing Community — Davinci 1.0 No Bed and Nozzle Heat]]> 2019-09-02T19:10:09Z PunBB https://www.soliforum.com/topic/18205/davinci-10-no-bed-and-nozzle-heat/ <![CDATA[Re: Davinci 1.0 No Bed and Nozzle Heat]]> Spoke to soon.
LCD panel control>Manual bed leveling will not heat up the extruder and bed.
If the manual controls, of the printing software, are used to heat up both, then the bed leveling will start when reached temps.

Back to printing.

]]> https://www.soliforum.com/user/7700/ 2019-09-02T19:10:09Z https://www.soliforum.com/post/151389/#p151389 <![CDATA[Re: Davinci 1.0 No Bed and Nozzle Heat]]> Reloaded firmware.
It works now.
So strange.

]]> https://www.soliforum.com/user/7700/ 2019-09-02T18:34:48Z https://www.soliforum.com/post/151388/#p151388 <![CDATA[Re: Davinci 1.0 No Bed and Nozzle Heat]]> Update.

I can manually turn on the nozzle and bed using the display panel, repetier .092.

Still wont turn on using manual leveling and printing software.

]]> https://www.soliforum.com/user/7700/ 2019-09-02T18:22:19Z https://www.soliforum.com/post/151387/#p151387 <![CDATA[Davinci 1.0 No Bed and Nozzle Heat]]> Ran a manual bed leveling and no heat temp readings.
Extruder/nozzle is on.
It happened after vacuuming inside, while printer on. Possibly touched something w/ the metal end of vacuum hose.

Non-stock early DAV 1.0.

No power at nozzle and bed. No power at black nozzle cables on MB.
Top white connector 0v. Bottom black connector 3v.
3v, 5v, 12v leds are lit.

Ive read that J47 fuse, is a common problem when touching nozzle w/ metal.
Found no J47 on MB.

How to find this problem ?

]]> https://www.soliforum.com/user/7700/ 2019-09-02T17:22:57Z https://www.soliforum.com/post/151386/#p151386