SoliForum - 3D Printing Community — How to print with Da Vinci 1.1 Plus

Re: How to print with Da Vinci 1.1 Plus

2020-03-22T15:10:35Z

Have you tried contacting XYZprinting support? They have been very helpful to me in the past.

Re: How to print with Da Vinci 1.1 Plus

2020-03-22T15:09:30Z

Are you using the latest XYZware version 2.1.34.1?

1. Switch on printer
2. Open XYZware
3. 'Import' (blue picture Arrow down) your .stl file - model is Black with White box around it
4. 'Print' (blue picture Extruder Nozzle) - print dialogue window opens
5. In window - 'to Print' shows your pinter as 'da Vinci 1.1 Plus'
6. 'Print' (orange picture 3d Printer and word 'Print')
... XYZware Object Slicing ...
... Slicing Complete ...
model is Blue, new dialogue window opens

Blue 'Preview'
Grey 'Save'

Green 'Print'

Re: How to print with Da Vinci 1.1 Plus

2019-06-16T15:11:53Z

Yes, and everytime the same message.

Re: How to print with Da Vinci 1.1 Plus

2019-06-16T08:21:47Z

Have you tried an stl file in the xyz software?

How to print with Da Vinci 1.1 Plus

2019-06-16T07:10:48Z

Hello,

already 4 day i tray to print something with this printer. I try different Software, I Try different files, like *.gcode, *.3w, but nothings works. I become only a massage "This model is not supported to this printer or file is of incorrect format". This massage I become also if I use the software from XYZPrinting- I have no idea what I have to do. Can somebody help me?