<![CDATA[SoliForum - 3D Printing Community — FREELSS 1.27 commercial (licensed) Cannot save 8mp camera]]> 2019-03-29T13:55:54Z PunBB https://www.soliforum.com/topic/17914/freelss-127-commercial-licensed-cannot-save-8mp-camera/ <![CDATA[Re: FREELSS 1.27 commercial (licensed) Cannot save 8mp camera]]> hwrd251 wrote:

have simular problem 1.22  "0 Error " as  have paid for licence and have to code which is saved in 1.22 and want to update to 1.27.
other issue is that i cannot save the 5mp camara as my default its defaults to mock camera. i have to reboot and the i have it at 1.2 and single lazer.
I am able to save all other changes,
Can you pleae help


Howard make sure you avoid the issue I had and save to a different configuration name other than calibration. Calibration only saves as 1.2MP

]]> https://www.soliforum.com/user/21015/ 2019-03-29T13:55:54Z https://www.soliforum.com/post/149941/#p149941 <![CDATA[Re: FREELSS 1.27 commercial (licensed) Cannot save 8mp camera]]> thank you for the prompt reply will try it all out over the weekend and let you know haw it all goes again thank you Howard

]]> https://www.soliforum.com/user/17912/ 2019-03-21T20:16:39Z https://www.soliforum.com/post/149811/#p149811 <![CDATA[Re: FREELSS 1.27 commercial (licensed) Cannot save 8mp camera]]> Hi Howard,

Please send a message to http://store.murobo.com/contact-us/ and we will send you a link to download version 1.27 of the software.  We have leveraged SD card downloads as opposed to the auto update system because there were too many different versions and updates of Raspbian to maintain auto-update support for them all in every software update.  As far as the camera error, please check the SETUP page under SETTINGS and ensure that the GPU has 256 MB or more memory allocated to it.  Also, double check your camera ribbon cables and "SUNNY" connector on the camera board.  Lastly, did you remember to enable support for the camera with raspi-config?  Do you get any errors if you run the command below from the command line?

raspistill -o cam.jpg

Regards,
Uriah

]]> https://www.soliforum.com/user/4789/ 2019-03-21T02:48:12Z https://www.soliforum.com/post/149804/#p149804 <![CDATA[Re: FREELSS 1.27 commercial (licensed) Cannot save 8mp camera]]> have simular problem 1.22  "0 Error " as  have paid for licence and have to code which is saved in 1.22 and want to update to 1.27.
other issue is that i cannot save the 5mp camara as my default its defaults to mock camera. i have to reboot and the i have it at 1.2 and single lazer.
I am able to save all other changes,
Can you pleae help

]]> https://www.soliforum.com/user/17912/ 2019-03-20T19:57:22Z https://www.soliforum.com/post/149796/#p149796 <![CDATA[Re: FREELSS 1.27 commercial (licensed) Cannot save 8mp camera]]> No problem.  I'm glad that you got it working.

]]> https://www.soliforum.com/user/4789/ 2019-02-27T00:30:11Z https://www.soliforum.com/post/149398/#p149398 <![CDATA[Re: FREELSS 1.27 commercial (licensed) Cannot save 8mp camera]]> Hairu526,

I feel foolish. I kept telling myself to try that and never did. Thanks, and again, I apologize.

]]> https://www.soliforum.com/user/21015/ 2019-02-26T22:52:46Z https://www.soliforum.com/post/149397/#p149397 <![CDATA[Re: FREELSS 1.27 commercial (licensed) Cannot save 8mp camera]]> Please ensure that you are not trying to save to the Calibration preset since it will always default to the 1.2 MP camera.  Also, the resolutions and modes available for the 5 MP camera are different than the 8 MP camera.

Uriah

]]> https://www.soliforum.com/user/4789/ 2019-02-15T12:27:05Z https://www.soliforum.com/post/149141/#p149141 <![CDATA[Re: FREELSS 1.27 commercial (licensed) Cannot save 8mp camera]]> Got my own thread going here. It is kinda lonely tho. I wish someone would help. I have really tried everything short of just trashing what I paid for and use the old code on Github.

That doesn't really seem fair that someone claims your money, says your entitled to support, but never gives any.

I guess it is just hard for me to understand. If any of you smart people would lend me a hand that would be great.

Thanks in advance.

]]> https://www.soliforum.com/user/21015/ 2019-02-09T22:39:06Z https://www.soliforum.com/post/148980/#p148980 <![CDATA[Re: FREELSS 1.27 commercial (licensed) Cannot save 8mp camera]]> carl_m1968 wrote:

Have you confirmed all the settings in your version are the same as here?

https://github.com/hairu/freelss/commit … a9b14d3ec5

Carl,

Since hairu gave me the software or at least the link to it and I entered my license I cannot update

0 ERROR:

I also do not believe the source code to be on the distribution that was prebuilt that he gave me.

I am lost completely I can send a few bucks via paypal for someone to get me going.  Nothing is free and any help would be appreciated.

]]> https://www.soliforum.com/user/21015/ 2019-02-09T17:51:00Z https://www.soliforum.com/post/148972/#p148972 <![CDATA[Re: FREELSS 1.27 commercial (licensed) Cannot save 8mp camera]]> Thanks for the reply. I made an assumption that the version I received from Uriah had the parts built in.

I find I have none of the settings listed in that code.

Do I have to recompile it?

Not sure I can do that because I am a winders guy and really new to pi

]]> https://www.soliforum.com/user/21015/ 2019-02-09T17:05:13Z https://www.soliforum.com/post/148971/#p148971 <![CDATA[Re: FREELSS 1.27 commercial (licensed) Cannot save 8mp camera]]> Thanks for the reply. I made an assumption that the version I received from Uriah had the parts built in.

I find I have none of the settings listed in that code.

Do I have to recompile it?

Not sure I can do that because I am a winders guy and really new to pi

]]> https://www.soliforum.com/user/21015/ 2019-02-09T17:05:10Z https://www.soliforum.com/post/148970/#p148970 <![CDATA[Re: FREELSS 1.27 commercial (licensed) Cannot save 8mp camera]]> Have you confirmed all the settings in your version are the same as here?

https://github.com/hairu/freelss/commit … a9b14d3ec5

]]> https://www.soliforum.com/user/7731/ 2019-02-08T17:34:53Z https://www.soliforum.com/post/148949/#p148949 <![CDATA[Re: FREELSS 1.27 commercial (licensed) Cannot save 8mp camera]]> no takers? did I ask wrong?

]]> https://www.soliforum.com/user/21015/ 2019-02-08T17:12:43Z https://www.soliforum.com/post/148947/#p148947 <![CDATA[FREELSS 1.27 commercial (licensed) Cannot save 8mp camera]]> Every time I try to save a configuration and save the 8mp camera as the default, when I click save the resolution sets back to 1.2mp. I wish I knew if it was taking the settings but I am betting it is not (because that is my luck). Maybe I did not load the image correctly, I don't know but I did a search for 8mp and 8 mega and nothing came back so I thought I would ask this as a new topic.

]]> https://www.soliforum.com/user/21015/ 2019-02-06T00:32:28Z https://www.soliforum.com/post/148901/#p148901