//#define PRINTCOUNTERback in
]]>yesterday i've done my conversion to RAMPS 1.4 on my SD2.
The first test to compile and upload firmware worked for me, with some issues, but okay.
Now i want to compile again with some extras, which i dindnt got in my first compile, but arduino is giving me some errors now.
sketch\ultralcd_st7920_u8glib_rrd.h: In function '__base_ctor .constprop':
sketch\ultralcd_st7920_u8glib_rrd.h:188:104: internal compiler error: Segmentation fault
U8GLIB_ST7920_128X64_RRD(uint8_t dummy) : U8GLIB(&u8g_dev_st7920_128x64_rrd_sw_spi) { UNUSED(dummy); }
^
Please submit a full bug report,
with preprocessed source if appropriate.
See <http://gcc.gnu.org/bugs.html> for instructions.
lto-wrapper.exe: fatal error: C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.15.0_x86__mdqgnx93n4wtt\hardware\tools\avr/bin/avr-gcc returned 1 exit status
compilation terminated.
c:/program files/windowsapps/arduinollc.arduinoide_1.8.15.0_x86__mdqgnx93n4wtt/hardware/tools/avr/bin/../lib/gcc/avr/5.4.0/../../../../avr/bin/ld.exe: error: lto-wrapper failed
collect2.exe: error: ld returned 1 exit status
exit status 1
Fehler beim Kompilieren für das Board Arduino/Genuino Mega or Mega 2560.i put my firmware configuration as a zip on this post, coulkd anybody please check that for me?
]]>