<![CDATA[SoliForum - 3D Printing Community — Suggestions on filament(s) to use]]> 2018-09-11T23:04:57Z PunBB https://www.soliforum.com/topic/17577/suggestions-on-filaments-to-use/ <![CDATA[Re: Suggestions on filament(s) to use]]> mark.giblin wrote:

As I live and breath, face well and truly planted in my palm in one of those DOH! moments.

Although I do not have the facilities... (yet, he says with an evil MuhWuh-hahahaha type laugh), I have just discovered that I have a Hackspace not 5 away, so I will be looking to join them when I can get hold of someone.


LOL, thank you for the giggle this evening, Mark. smile

]]> https://www.soliforum.com/user/10399/ 2018-09-11T23:04:57Z https://www.soliforum.com/post/146185/#p146185 <![CDATA[Re: Suggestions on filament(s) to use]]> As I live and breath, face well and truly planted in my palm in one of those DOH! moments.

Although I do not have the facilities... (yet, he says with an evil MuhWuh-hahahaha type laugh), I have just discovered that I have a Hackspace not 5 away, so I will be looking to join them when I can get hold of someone.

]]> https://www.soliforum.com/user/18727/ 2018-09-11T20:20:01Z https://www.soliforum.com/post/146184/#p146184 <![CDATA[Re: Suggestions on filament(s) to use]]> mark.giblin wrote:

Oh boy, the one I like the sound of is $37 for 500g and then there is the shipping, I think I got a bit of saving to do.


Actually I meant raw as in sheet, or rod that you can mill to specs not everything needs to be or can be printed. There are other forms of manufacturing that sometimes are better than printing.

]]> https://www.soliforum.com/user/7731/ 2018-09-10T20:38:05Z https://www.soliforum.com/post/146173/#p146173 <![CDATA[Re: Suggestions on filament(s) to use]]> Oh boy, the one I like the sound of is $37 for 500g and then there is the shipping, I think I got a bit of saving to do.

]]> https://www.soliforum.com/user/18727/ 2018-09-10T20:10:54Z https://www.soliforum.com/post/146172/#p146172 <![CDATA[Re: Suggestions on filament(s) to use]]> You might want to look at McMaster Carr or Grainger and look at raw Teflon or Delrin stock.

]]> https://www.soliforum.com/user/7731/ 2018-09-10T15:07:28Z https://www.soliforum.com/post/146167/#p146167 <![CDATA[Re: Suggestions on filament(s) to use]]> When my orders turn up, then I will be able to work on making a test rig, see what sort of temperatures were talking.

]]> https://www.soliforum.com/user/18727/ 2018-09-10T14:44:15Z https://www.soliforum.com/post/146165/#p146165 <![CDATA[Re: Suggestions on filament(s) to use]]> That information does not really help. We need the exact temp the material would be exposed to for the greatest time. That is what would determine the optimal material if any.

]]> https://www.soliforum.com/user/7731/ 2018-09-10T11:19:48Z https://www.soliforum.com/post/146160/#p146160 <![CDATA[Re: Suggestions on filament(s) to use]]> Thats the problem when you QT something.

I did a simple 2:8 ratio and 8:2 ratio on efficency : thermal loss

so using 20% as the basis of efficiency, the output of 80% heat is 240 Watts
and using 80% efficiency with 20% thermal heat is 60 Watts

the item in question is going to be thermally balanced so that its initial draw will be high but its maintaining draw would be the lower end of the scale. or in simple terms, 240 Watts to get up to temperature and 60 Watts to maintain temperature in a thermally balanced system that has active cooling to help maintain the balance.

Hope that helps.

]]> https://www.soliforum.com/user/18727/ 2018-09-10T10:46:53Z https://www.soliforum.com/post/146158/#p146158 <![CDATA[Re: Suggestions on filament(s) to use]]> mark.giblin wrote:

It as project I am working on and it has to be on the QT.

I understand that - but the lack of information is also making it difficult to offer "accurate" suggestions.

for me, if it is load bearing, and subject to some heat, then I would go with one of the nylon offerings. It would be far more durable than PETG.

just a suggestion, however. You do what you want.

]]> https://www.soliforum.com/user/10399/ 2018-09-10T00:52:57Z https://www.soliforum.com/post/146150/#p146150 <![CDATA[Re: Suggestions on filament(s) to use]]> It as project I am working on and it has to be on the QT.

]]> https://www.soliforum.com/user/18727/ 2018-09-09T11:46:41Z https://www.soliforum.com/post/146104/#p146104 <![CDATA[Re: Suggestions on filament(s) to use]]> from the description given, I would suggest something in the nylon family, myself.
but not knowing the exact application, it is just a suggestion.

]]> https://www.soliforum.com/user/10399/ 2018-09-07T00:28:19Z https://www.soliforum.com/post/146050/#p146050 <![CDATA[Re: Suggestions on filament(s) to use]]> If the plastic is just being used as an insulator it should be fine. But if it is load bearing it could be an issue as it softens from the heat, the load will make it deform.

]]> https://www.soliforum.com/user/7731/ 2018-09-06T14:05:32Z https://www.soliforum.com/post/146030/#p146030 <![CDATA[Re: Suggestions on filament(s) to use]]> I guess I better see what initial tests turn up as for the thermal sink which will be various different lengths, backed up with a heatsink and fan off a computer.

I am figuring that there is a fair bit of heat given off with this item, so I was asking based on experience the best material that is out there that can withstand around 60 degrees celsius. There will be fans to help with thermal dissipation.

]]> https://www.soliforum.com/user/18727/ 2018-09-06T13:53:12Z https://www.soliforum.com/post/146029/#p146029 <![CDATA[Re: Suggestions on filament(s) to use]]> PETG melts at 210 to 235. It is the only material I print with now. As for the glass transition temp it is around 80c so it may not be high enough for you.

]]> https://www.soliforum.com/user/7731/ 2018-09-06T13:46:24Z https://www.soliforum.com/post/146028/#p146028 <![CDATA[Re: Suggestions on filament(s) to use]]> look at the glass transition temp of material. PC would be the best i believe. Nylon, ASA, ABS depending on the temps it needs to withstand

]]> https://www.soliforum.com/user/6797/ 2018-09-06T13:41:09Z https://www.soliforum.com/post/146027/#p146027