<![CDATA[SoliForum - 3D Printing Community — food dehydrator to dry filament]]>2018-08-11T23:21:02ZPunBBhttps://www.soliforum.com/topic/17524/food-dehydrator-to-dry-filament/<![CDATA[Re: food dehydrator to dry filament]]>I live in Florida and the outside temp and humidity are high. the temp and humidity inside is 79° & 41% below is the outside temp and humidity and below that is what is considered the optimum indoor humidity. My indoor humidity is Optimum.
]]>https://www.soliforum.com/user/187/2018-08-11T23:21:02Zhttps://www.soliforum.com/post/145550/#p145550<![CDATA[Re: food dehydrator to dry filament]]>A fresh you tube video on the subject . Interesting.]]>https://www.soliforum.com/user/6775/2018-08-11T21:40:28Zhttps://www.soliforum.com/post/145549/#p145549<![CDATA[Re: food dehydrator to dry filament]]>I took my calibrated type K TC meter and checked the temp. it fluctuates about 10°F but average is 162°F
]]>https://www.soliforum.com/user/187/2018-08-11T15:28:51Zhttps://www.soliforum.com/post/145547/#p145547<![CDATA[Re: food dehydrator to dry filament]]>Carl I keep the Lid to the fry daddy i use for vapor bathing in the freezer and my wife always fusses about it. So i can just see her now if i start putting filament in it.]]>https://www.soliforum.com/user/187/2018-08-11T01:58:43Zhttps://www.soliforum.com/post/145532/#p145532<![CDATA[Re: food dehydrator to dry filament]]>You can store it the freezer to keep moisture out and you can use the freezer to remove moisture as well. It's a process called sublimation.]]>https://www.soliforum.com/user/7731/2018-08-11T01:38:12Zhttps://www.soliforum.com/post/145530/#p145530<![CDATA[food dehydrator to dry filament]]>My ABS filament has pulled in moisture so i got this and modified it today. Notice the thermometer. Thanks Dale
