Hi community,

I bought recently a SLA - D7.
I want to print a file using creation workshop, the object is bit complex.
While slicing the .png slices looks ok ( I can imagine the .png files resemble 3D File).

But the print is failing (can't print properly).
I have tried many options in whole week but no success.

Can somebody assist me,  I can pay for the time assisting me.
It is getting into my nerves, and I need to print this object.

Thank you in advance.

Welcome Yes, But as others have said we need a boat load of information to even began to help you. The easiest way is to show a screen print of you Creation Workshop settings. For both machine and slicer. Also which version is your D7? Have you tried the custom Creation Workshop just for it?

sorry, but a .png is not a 3d file.

png stands for "portable network graphics" and is similar to a .gif file in its use.

you need a .obj, .stl, or possibly a .dxf file type depending on what the slicing software will accept.

What she is probably talking about is that the slicer that comes with the D7 which is a DUV printer converts the slices to a PNG that is projected on the LCD during the exposure process. With most slicers you don't really see a complete slice like you do in the SLA printers if you view slice by slice.

png stands for "portable network graphics" and is similar to a .gif file in its use.

you need a .obj, .stl, or possibly a .dxf file type depending on what the slicing software will accept.

I bought recently a SLA - D7.
I want to print a file using creation workshop, the object is bit complex.
While slicing the .png slices looks ok ( I can imagine the .png files resemble 3D File).

But the print is failing (can't print properly).
I have tried many options in whole week but no success.

Can somebody assist me,  I can pay for the time assisting me.
It is getting into my nerves, and I need to print this object.

Thank you in advance.