SoliForum - 3D Printing Community — Davinci 1.0 Repetier Homing after print./

Re: Davinci 1.0 Repetier Homing after print./

2018-02-17T14:44:44Z

There are two places in repitior host to set end gcode, and if you slice with slic3r, it has its own end gcode setting, check all end gcode, depending on your settings, different end gcode is used, one of them home z axis may cause the problem.

Re: Davinci 1.0 Repetier Homing after print./

2018-02-16T11:38:57Z

Use this corrected end gcode. The issue is the sequence order.

M117 Done
G92 E0 ; reset extrusion distance
M104 S0 ; turn off extruder
M140 S0 ; turn off Bed
G90 ; Absolute
G28 Z180 ; Move Bed Down
G28 X0 Y0 ; Home XY
M84 ; Disable motors

Davinci 1.0 Repetier Homing after print./

2018-02-16T03:07:28Z

no matter what I do I cannot get my davinci 1.0s (2 of them) to quit homing on the Z axis after printing.. its cruising the prints because its hitting the rails / extruder
davinci 1.0 aio

latest repetier.

printing using repetier host

slicing using slic3r

here is my end gcode

M117 Done
G92 E0 ; reset extrusion distance
M104 S0 ; turn off extruder
M140 S0 ; turn off Bed
G90 ; Absolute
G28 X0 Y0 Z180; home
M117 Down Bed
G1 Z180 ; Lower bed
M84 ; Disable motors