<![CDATA[SoliForum - 3D Printing Community — print gcode files to miniMaker]]> 2022-02-10T22:34:24Z PunBB https://www.soliforum.com/topic/17028/print-gcode-files-to-minimaker/ <![CDATA[Re: print gcode files to miniMaker]]> PLEASE CAN YOU ADD THE XYZ COLOR dv1CP0A000 TO THE CONVERTER. I have the ability to change ink levels then please....

]]> https://www.soliforum.com/user/24947/ 2022-02-10T22:34:24Z https://www.soliforum.com/post/155234/#p155234 <![CDATA[Re: print gcode files to miniMaker]]> Hi all I have an error with the EEPROM reading my nozzle serial number, I have tried 3 nozzles and none will read, I can clean the nozzle only using this software, my LCD is frozen its a Super anyone have any idea how to clear the EEPROM?

]]> https://www.soliforum.com/user/24947/ 2021-09-22T13:33:32Z https://www.soliforum.com/post/154990/#p154990 <![CDATA[Re: print gcode files to miniMaker]]> carl_m1968 wrote:

Your SDcard in the printer is bad. Or your comment section in your file is too large.

Hello
I am using da Vinci nano with miniMover 0.96beta. The program is super.
I get the same message as user "alexis_martins_silva" (...error_sd_card) when I try to print the .gcode file created by KISSLICER v 1.6.3. My SD card is OK. The .gcode file is 500 KB.
Is the problem really with the size of the comments section? - if so, what can be safely removed from comments?
Maybe it's a bug in miniMover 0.96beta? - is it still possible to fix this error by the developer of the program?
greetings

]]> https://www.soliforum.com/user/21736/ 2021-05-07T20:46:57Z https://www.soliforum.com/post/154762/#p154762 <![CDATA[Re: print gcode files to miniMaker]]> try to print directly from Cura on mac, minimaker support Cura direct printing after firmware upgrade.

]]> https://www.soliforum.com/user/17164/ 2020-11-28T14:26:45Z https://www.soliforum.com/post/154233/#p154233 <![CDATA[Re: print gcode files to miniMaker]]> Can I please have a Mac version

]]> https://www.soliforum.com/user/25331/ 2020-11-28T09:13:19Z https://www.soliforum.com/post/154232/#p154232 <![CDATA[Re: print gcode files to miniMaker]]> Hi!

Probably this topic isn't the best place to put my question, but I didn't find better. New topic is useless for now.

So, the question. From where I can get the list of recognizable G-codes for different DaVinci printers, which this software will translate to 3w. A list with M-codes are welcome too.

Regards!

]]> https://www.soliforum.com/user/24418/ 2020-05-19T09:30:46Z https://www.soliforum.com/post/153348/#p153348 <![CDATA[Re: print gcode files to miniMaker]]> Anybody got this working in MacOS? I can compile, but when I run the script nothing happens and there is also no output to the terminal...

]]> https://www.soliforum.com/user/24286/ 2020-05-02T19:16:08Z https://www.soliforum.com/post/153165/#p153165 <![CDATA[Re: print gcode files to miniMaker]]> ace192 wrote:

Hi folks, if I go to GitHub it shows lots of file I have no idea how to make on windows. how do I make the exe from all this source code?
Thanks!

You got to download the from the poster, which is a link right under his post. There are two files click download and put in the same folder you downloaded the git hub files.

]]> https://www.soliforum.com/user/21518/ 2020-03-01T19:24:00Z https://www.soliforum.com/post/152694/#p152694 <![CDATA[Re: print gcode files to miniMaker]]> So this looks really cool, but I have no idea how to open the program...there is no .exe I double click. How do I open the script? How do I get that window you all have up? Please help...

]]> https://www.soliforum.com/user/21518/ 2020-03-01T19:19:25Z https://www.soliforum.com/post/152693/#p152693 <![CDATA[Re: print gcode files to miniMaker]]> Hi folks, if I go to GitHub it shows lots of file I have no idea how to make on windows. how do I make the exe from all this source code?
Thanks!

]]> https://www.soliforum.com/user/20829/ 2020-01-10T15:55:59Z https://www.soliforum.com/post/152333/#p152333 <![CDATA[Re: print gcode files to miniMaker]]> I download today and it works pretty well and didn't meet your problem. Have you connected to printer first?

The Mad Scientist wrote:

I have just downloaded the 0.95 version and in the ui there is no option to print can anyone help me with this please

]]> https://www.soliforum.com/user/22947/ 2019-12-27T15:21:38Z https://www.soliforum.com/post/152264/#p152264 <![CDATA[Re: print gcode files to miniMaker]]> I have just downloaded the 0.95 version and in the ui there is no option to print can anyone help me with this please

]]> https://www.soliforum.com/user/23165/ 2019-12-15T15:02:33Z https://www.soliforum.com/post/152174/#p152174 <![CDATA[Re: print gcode files to miniMaker]]> What chance someone can take the knowledge here and turn it into something that would allow octaprint to integrate with our XYZ minis? does the octaprint plugin API provide for driver development in a way that would allow this?

]]> https://www.soliforum.com/user/23124/ 2019-12-12T22:32:54Z https://www.soliforum.com/post/152146/#p152146 <![CDATA[Re: print gcode files to miniMaker]]> carl_m1968 wrote:
rbland wrote:
carl_m1968 wrote:

How big is the file you are trying to print. This setup does not like large files.

One gcode file I am trying to print is 1.36MB


That could be the issue. Try a small file like the common 20mm calcube and see if it works.

The largest file I have printed on any machine is 31 hours and that file was 92KB.

1.36MB seems like a very large file or it has a lot of open area in it.

The 1.36MB file would only take a few hours but I also tried the MiniMover with another file that would only take 30 mins to print. I think the issue has something to do with the gcode. When I imported the gcode (with the new XYZ heading) into XYZware, it states I do not have the correct filament and won't allow me to print.

]]> https://www.soliforum.com/user/23095/ 2019-12-10T12:46:46Z https://www.soliforum.com/post/152140/#p152140 <![CDATA[Re: print gcode files to miniMaker]]> rbland wrote:
carl_m1968 wrote:
rbland wrote:

Hello all. I've been reading through this and everyone seems to be able to print with gcode using the mini mover, except me.

I have MiniMoverUI v0.9.5, and any gcode or .3w files I send with the MiniMover, signals the printer but nothing prints. The printer beeps and shows its busy while the file is transferred, but nothing prints and MiniMover freezes multiple times.  I have used the gcode header and footer for the XYZ printers.  I am using a XYZ Da Vinci Mini w+

Any help would be greatly appreciated.


How big is the file you are trying to print. This setup does not like large files.

One gcode file I am trying to print is 1.36MB


That could be the issue. Try a small file like the common 20mm calcube and see if it works.

The largest file I have printed on any machine is 31 hours and that file was 92KB.

1.36MB seems like a very large file or it has a lot of open area in it.

]]> https://www.soliforum.com/user/7731/ 2019-12-09T19:20:22Z https://www.soliforum.com/post/152137/#p152137