SoliForum - 3D Printing Community — Scan problem with Da Vinci Pro 1.0

Re: Scan problem with Da Vinci Pro 1.0

2018-01-21T13:31:37Z

Grendel wrote:

have you checked your usb cable, maybe there is a bad connection.

Sorry for late answer. I tried another USB port and another cable, same problem

Re: Scan problem with Da Vinci Pro 1.0

2018-01-09T16:19:00Z

have you checked your usb cable, maybe there is a bad connection.

Re: Scan problem with Da Vinci Pro 1.0

2018-01-09T12:15:39Z

It's not that the scanning result is poor, i just don't see anything at all in xyz scan software.

Re: Scan problem with Da Vinci Pro 1.0

2018-01-09T11:16:17Z

You should read up on scanning requirements. The surface of an apple is shiney so it needs to be matted. They sell a spray to do this. Shiney or clear objects make poor scanning samples.

Re: Scan problem with Da Vinci Pro 1.0

2018-01-09T10:39:28Z

Just found out that when i save the result, i do get an object, but in the xyz scan software i don't see anything (and because of this i can't edit the object before saving).

Scan problem with Da Vinci Pro 1.0

2018-01-09T10:06:08Z

I'm using the latest software (2.2.18) and it calibrated fine.
When i'm trying to scan an object (an apple for testing), everything seems fine (i see the 'laser line' and the turntable moves fine), but i don't get any object - it seems like no points are found, no mesh is being created (tried every mode - auto, light, dark,...).

The whole scanning process takes about 5 minutes, but i don't get any result, just empty.

Can anyone help?