<![CDATA[SoliForum - 3D Printing Community — DaVinci Minimaker error code 0060_1]]> 2017-12-31T05:49:22Z PunBB https://www.soliforum.com/topic/17000/davinci-minimaker-error-code-00601/ <![CDATA[Re: DaVinci Minimaker error code 0060_1]]> Thanks, I checked all of the cables and tried to print again and works again hopefully for ever now.

]]> https://www.soliforum.com/user/18094/ 2017-12-31T05:49:22Z https://www.soliforum.com/post/141229/#p141229 <![CDATA[Re: DaVinci Minimaker error code 0060_1]]> internal communication error, try reboot the printer. if reboot doesn't fix it, send it back if still under warranty. check connection between nfc reader to mainboard and from mainboard to hotend if warranty expired.

my guess is the nfc card is not read realibly by nfc reader or the hotend cable is not plugged in securely.

in the worse case, do RAMPS conversion.

]]> https://www.soliforum.com/user/17164/ 2017-12-31T05:00:00Z https://www.soliforum.com/post/141228/#p141228 <![CDATA[DaVinci Minimaker error code 0060_1]]> My printer has been going perfect and now the last couple of times it has started off fine but it stops half way through and says filament stuck and the error code 0060_1, the filament isn't stuck at all and it loads and unloads fine and i have cleaned the fed cogs and the extrusion head a couple of days ago. Does anyone know what this error code means and what i can do to fix the problem?

]]> https://www.soliforum.com/user/18094/ 2017-12-31T04:06:42Z https://www.soliforum.com/post/141227/#p141227