<![CDATA[SoliForum - 3D Printing Community — Filawinder always spinning]]>2018-01-03T08:26:59ZPunBBhttps://www.soliforum.com/topic/16980/filawinder-always-spinning/<![CDATA[Re: Filawinder always spinning]]>There is now alot of room so it should be fine thanks]]>https://www.soliforum.com/user/17901/2018-01-03T08:26:59Zhttps://www.soliforum.com/post/141289/#p141289<![CDATA[Re: Filawinder always spinning]]>Delloman, If you have or can find some cheap heat shrink tubing that will fit over one of those it would prevent that from happening in the future.
-os3dp
]]>https://www.soliforum.com/user/6685/2018-01-02T23:39:45Zhttps://www.soliforum.com/post/141282/#p141282<![CDATA[Re: Filawinder always spinning]]>That was it they where touching]]>https://www.soliforum.com/user/17901/2018-01-02T20:45:49Zhttps://www.soliforum.com/post/141278/#p141278<![CDATA[Re: Filawinder always spinning]]>with the way its acting in the video Id say its in auto mode.]]>https://www.soliforum.com/user/6797/2017-12-27T20:02:31Zhttps://www.soliforum.com/post/141127/#p141127<![CDATA[Re: Filawinder always spinning]]>Looking at the control board in the video you posted, there is a MOSFET and a power regulator with silver looking tabs. It looks like they may be touching each other ot something else. Make sure they don't touch and then see what happens.
-os3dp
]]>https://www.soliforum.com/user/6685/2017-12-27T18:37:42Zhttps://www.soliforum.com/post/141126/#p141126<![CDATA[Re: Filawinder always spinning]]>I have swapped the power and auto buttons no change]]>https://www.soliforum.com/user/17901/2017-12-27T18:11:08Zhttps://www.soliforum.com/post/141124/#p141124<![CDATA[Re: Filawinder always spinning]]>https://photos.app.goo.gl/tIWP6nU0AofUThsG2 https://photos.app.goo.gl/kE5A5b2bRyxvnuGG2]]>https://www.soliforum.com/user/17901/2017-12-27T18:09:54Zhttps://www.soliforum.com/post/141123/#p141123<![CDATA[Re: Filawinder always spinning]]>The buttons move left right and Center so I don't know]]>https://www.soliforum.com/user/17901/2017-12-27T17:18:08Zhttps://www.soliforum.com/post/141121/#p141121<![CDATA[Re: Filawinder always spinning]]>in manual mode the the knob only controls the speed of the winder unless you are holding a button down. I think you might have a wire crossed if its not controlling the speed]]>https://www.soliforum.com/user/6797/2017-12-27T17:08:38Zhttps://www.soliforum.com/post/141119/#p141119<![CDATA[Re: Filawinder always spinning]]>Is the Red laser lit on the sensor?]]>https://www.soliforum.com/user/6685/2017-12-27T16:55:59Zhttps://www.soliforum.com/post/141117/#p141117<![CDATA[Re: Filawinder always spinning]]>No but it moves the gide left and right]]>https://www.soliforum.com/user/17901/2017-12-27T16:54:20Zhttps://www.soliforum.com/post/141116/#p141116<![CDATA[Re: Filawinder always spinning]]>Delloman,
If you turn the variable knob does the motor get faster and slower?
-os3dp
]]>https://www.soliforum.com/user/6685/2017-12-26T22:29:47Zhttps://www.soliforum.com/post/141095/#p141095<![CDATA[Re: Filawinder always spinning]]>Spin test* so I flipped the magnet no charge please help I am working with pla and need the winder]]>https://www.soliforum.com/user/17901/2017-12-26T22:04:08Zhttps://www.soliforum.com/post/141094/#p141094<![CDATA[Re: Filawinder always spinning]]>So when I plug the winder in it spins no matter what I do I have checked all the wireing and it checks out only thing I can think is maybe the magnet is backwards? I did the spend test but still could have gotten pulled over would this be a symptom of that?]]>https://www.soliforum.com/user/17901/2017-12-26T03:33:15Zhttps://www.soliforum.com/post/141057/#p141057<![CDATA[Filawinder always spinning]]>I am trying to calibrate the winder but it's always spinning I checked the wireing and the switch works. I checked it with a meter. I could use some help. I don't know what to try next]]>https://www.soliforum.com/user/17901/2017-12-24T21:16:41Zhttps://www.soliforum.com/post/141026/#p141026