SoliForum - 3D Printing Community — Nozzle temperatures for Mini W

Re: Nozzle temperatures for Mini W

2018-02-14T17:27:45Z

I'm currently printing with official, XYZ Black Filament, and at least according to the Printer Monitor, the Extruder temp has been at 215C the entire time so far. Just curious as to why this might be, and if it effects those using their own tags/filament?

Re: Nozzle temperatures for Mini W

2018-01-07T00:43:52Z

Congrats to a nice printer! Yes, I see it too.

Re: Nozzle temperatures for Mini W

2018-01-05T14:38:24Z

I just got my Mini at Christmas, but noticed that the new XYZ Ware software allows extruder temp changes in the Advanced area. Are you seeing that too?

Re: Nozzle temperatures for Mini W

2018-01-04T03:52:47Z

I checked a few of the above, but they seems to be using the same temperatures. This time I had updated the firmware. It seems as they changed temperature for 0x55 from 208 to 213 or 203 (don't remember which, took no note of that)

Temperatures PLA:
30 193 Bronze
31 203 Silver
32 203 Clear Red
33 203 Clear
34 203 Bottle green
35 213 Neon magenta
36 203 Steel blue
37 203 Sun orange

Using the new firmware it is also possible to offset the temperature in XYZware.

Re: Nozzle temperatures for Mini W

2017-11-26T15:01:56Z

Thank you!
This is my list of colors, extracted from the Windows application:

0x30 : Bronze
0x31 : Silver
0x32 : Clear Red
0x33 : Clear
0x34 : Bottle Green
0x35 : Neon Magenta
0x36 : SteelBlue
0x37 : Sun Orange
0x38 : Pearl White
0x39 : Copper
0x41 : Purple
0x42 : Blue
0x43 : Neon Tangerine
0x44 : Viridity
0x45 : Olivine
0x46 : Gold
0x47 : Green
0x48 : Neon Green
0x49 : Snow White
0x4A : Neon Yellow
0x4B : Black
0x4C : Violet
0x4D : Grape Purple
0x4E : Purpurine
0x4F : Clear Yellow
0x50 : Clear Green
0x51 : Clear Tangerine
0x52 : Red
0x53 : Cyber Yellow
0x54 : Tangerine
0x55 : Clear Blue
0x56 : Clear Purple
0x57 : White
0x58 : Clear Magenta
0x59 : Yellow
0x5A : Nature

Nozzle temperatures for Mini W

2017-11-26T14:19:28Z

I made test-prints on FW 1.1.2 for all (to me) known materials for Mini W. The temperature mentioned is the average reading in the Windows application.
If you want to change to 208 degrees, just change the third byte on page 08 to 5A 50 55 00.
There is a good chance that the list of supported materials has grown in later FW releases.

Temperatures PLA:
3F 193 '--' (same name in app)
40 193 '--' (same name in app)
41 203 Purple
42 203 Blue
43 203 Neon Tangerine
44 203 Viridity
45 203 Olivine
46 203 Gold
47 203 Green
48 213 Neon Green
49 203 Snow White
4A 213 Neon Yellow
4B 203 Black
4C 203 Violet
4D 203 Grape Purple
4E 203 Purpurine
4F 203 Clear Yellow
50 213 Clear Green
51 203 Clear Tangerine
52 203 Red
53 203 Cyber Yellow
54 203 Tangerine
55 208 Clear Blue
56 213 Clear Purple
57 213 White
58 203 Clear Magenta
59 203 Yellow (Clear Yellow in Android app)
5A 203 Nature
5B 193 '--' (same name in app)
5C '--' refuse to print, error msg, must make voltage reset to resume testing.