yizhou.he wrote:In the case of Jr. conversion, the major difference is RAMS board are too tall to fit in the original space where stock board sits. You will have three layer of boards stack on top of each other for RAMPS board while only one layer board for MKS. You will have to print a case for the RAMPS board or find another place to mount it.
Other benefit for MKS board includes easy support of touch screen, you can get MKS board + touch screen combo for less than $40 on aliexpress but I have not see similar good deal for touch screen support for RAMPS board.
Keep in mind that MKS board is JST 2.54 but Jr. use JST 2.0, therefore you still need to make cable for MKS board.
you must not look very hard or think Aliepress is the only shopping venue in the world.
https://www.ebay.com/itm/USA-3D-Printer … Swax5YvlUk
Includes:
1x Mega 2560 board for Arduino
1x USB Cable
1x 3D Printer Controller RAMPS 1.4 Board（Red Color)
5x A4988 Stepper Motor Driver with Heatsink
1x 12864 LCD with control board
1x Smart Adapter
2 xFC flat cableAll for just $30 with free shipping from the US.
Do you understand the difference between A4988 drivers and TMC2100, besides the price. Huge differences, A4988 drivers are basically free, like you go to aliexpress and buy ladies swimsuit for the wifey, theyll throw in 4 free A4988 stepper drivers just incase
]]>And now I'm using this as print underground:
https://www.amazon.de/gp/product/B077TZ … &psc=1
All other materials are bad and not 100% secure for 3d printing. I do not have to change it the next year, and the 1st layer is very good.
]]>Aliexpress is the consumer side of Alibaba. They are one in the same company where Alibaba usually does business with other businesses and require bulk buys where as Aliexpress does business with individuals and allows single or small number buys. In short Alibaba owns Aliexpress.
True, Alibaba do owns Aliexpress and many school and college, bank, and AI chip company in China, but customer protection on Alibaba b2b platform is very little, individual customer usually don't get good experience on the b2b platform. Also the product introduction and documentation related to the product is also minimal on Alibaba. In short, individual customer get much better shopping experience in Aliexpress than Alibaba.
]]>Tin Falcon wrote:That kind of says it all .But i do not think all of any group are bad . But enough to expect questionable results. I prefer at least shipped from usa. Or better yet made in usa if i can aford it.
In all do respect Mr He . most of of here stay away from Alibaba and the 40 thieves. This includes the subsidiary ali express.
I will buy direct from china on small items that are not often used. if it is a really good deal.But then i only gamble what i am willing to lose. usually a ten or $20 item .So you are correct the mks gen 1.4 board is indeed mega 2560 based.
Yes, I can confirm MKS sbase are 32 bit processor and they are more expensive.
Alibaba and ali-express are different platform, I do not buy from Alibaba, it is b2b platform and have no much customer service or customer protection.
ali-express is more like amazon, it is b2c platform and offer buyer protection and keep track of seller reputation. You can dispute in ali-express if not happy with seller's response, I have so far no need to dispute because seller with good reputation all address my issue in satisfactory manner and try very hard to stop me from initiate a dispute. So far my only complaint for aliexpress is slow shipping. 2-3 weeks is very common. I would buy from amazon for parts needed in timely manner.
Aliexpress is the consumer side of Alibaba. They are one in the same company where Alibaba usually does business with other businesses and require bulk buys where as Aliexpress does business with individuals and allows single or small number buys. In short Alibaba owns Aliexpress.
]]>That kind of says it all .But i do not think all of any group are bad . But enough to expect questionable results. I prefer at least shipped from usa. Or better yet made in usa if i can aford it.
In all do respect Mr He . most of of here stay away from Alibaba and the 40 thieves. This includes the subsidiary ali express.
I will buy direct from china on small items that are not often used. if it is a really good deal.But then i only gamble what i am willing to lose. usually a ten or $20 item .So you are correct the mks gen 1.4 board is indeed mega 2560 based.
Yes, I can confirm MKS sbase are 32 bit processor and they are more expensive.
Alibaba and ali-express are different platform, I do not buy from Alibaba, it is b2b platform and have no much customer service or customer protection.
ali-express is more like amazon, it is b2c platform and offer buyer protection and keep track of seller reputation. You can dispute in ali-express if not happy with seller's response, I have so far no need to dispute because seller with good reputation all address my issue in satisfactory manner and try very hard to stop me from initiate a dispute. So far my only complaint for aliexpress is slow shipping. 2-3 weeks is very common. I would buy from amazon for parts needed in timely manner.
]]>OK so the MKS gen 1.4 is a 8 bit board the mks sbase 1.3 is a 32 bit board. Sorry for the confusion
Hehehe hahaha... He said reputable and Chinese in the same sentence... Help I am rolling on the floor, laughing my a$$ off...
That kind of says it all .But i do not think all of any group are bad . But enough to expect questionable results. I prefer at least shipped from usa. Or better yet made in usa if i can aford it.
In all do respect Mr He . most of of here stay away from Alibaba and the 40 thieves. This includes the subsidiary ali express.
I will buy direct from china on small items that are not often used. if it is a really good deal.But then i only gamble what i am willing to lose. usually a ten or $20 item .So you are correct the mks gen 1.4 board is indeed mega 2560 based.
There fixed. Not all Chinese, but just Chinese sources.
]]>Hehehe hahaha... He said reputable and Chinese in the same sentence... Help I am rolling on the floor, laughing my a$$ off...
That kind of says it all .But i do not think all of any group are bad . But enough to expect questionable results. I prefer at least shipped from usa. Or better yet made in usa if i can aford it.
In all do respect Mr He . most of of here stay away from Alibaba and the 40 thieves. This includes the subsidiary ali express.
I will buy direct from china on small items that are not often used. if it is a really good deal.But then i only gamble what i am willing to lose. usually a ten or $20 item .
So you are correct the mks gen 1.4 board is indeed mega 2560 based.
]]>check the reprap electronics wiki to verify this.
]]>https://folgertech.com/products/3d-prin … sa-arduino
https://folgertech.com/collections/lcd- … -printer-1
https://folgertech.com/products/ramps- … -printer-1
You can get quality made in use Ramps Here. Not cheap but as they say you often get what you pay for
]]>If you don't mind put RAMPS board and LCD out of the case, go RAMPS direction. There is nice box you can print to house and protect RAMPS board and LCD with cooling fan. Disadvantage with this plan is you need lots of long cable for endstop and step motor depend on where you want to mount the box. Good cable making and management is important, otherwise you end up with unstable system. Most of cable disconnection will likely lead to printer stop or reboot.
If you want to keep main board inside, MKS is better choice, there will only LCD cable and SD card reader cable came out of the printer case, and even if any of these two cable gets disconnected (which is unlikely due to the solid plug and relative strong cable), printer will keep running just fine.
]]>