2017-09-09T21:00:21Z PunBB https://www.soliforum.com/topic/16707/take-apart-extruder-housing/ Da vinci Jr.? take out four screws from fan, remove fan, take out two screws under the fan, then try to push the little tabs in on the side with a small screwdriver and gently pry the top up.

]]> https://www.soliforum.com/user/17164/ 2017-09-09T21:00:21Z https://www.soliforum.com/post/137888/#p137888 I you carefully push the little tabs in on the side with a small screwdriver and gently pry the top up. When you get one side up the other side should come off without to much effort. DON'T FORCE IT!

]]> https://www.soliforum.com/user/13167/ 2017-09-02T23:50:30Z https://www.soliforum.com/post/137672/#p137672 While removing the filament feeder tube, I unscrewed the metal fitting, leaving part of it inside the extruder housing.  How can I open the extruder box, so I can reassemble the filament input set up?

]]> https://www.soliforum.com/user/17466/ 2017-09-02T23:10:54Z https://www.soliforum.com/post/137671/#p137671