<![CDATA[SoliForum - 3D Printing Community — Lets talk about them steppers.]]> 2017-08-28T10:14:51Z PunBB https://www.soliforum.com/topic/16690/lets-talk-about-them-steppers/ <![CDATA[Re: Lets talk about them steppers.]]> Check your belts  and any other sources of backlash.

]]> https://www.soliforum.com/user/6775/ 2017-08-28T10:14:51Z https://www.soliforum.com/post/137503/#p137503 <![CDATA[Lets talk about them steppers.]]> I have my Prusa I4 up and running. 

my first prints are of a test piece so that basic dimensions can be checked and calibrated.  And, the Z-axis is spot on, but the X and Y-axis fall short equally by .4mm on the ID and OD.  Odd that the orifice is .4mm?

Now, I see that the the steppers are set to 80.4 steps for X and Y on the LCD.

So I need to recalculate/change the steps to adjust print to proper dimension?

-Del


Prusa I4
Rambo v1.5
2.5 drive belt
.4mm orifice
PLA 1.75

]]> https://www.soliforum.com/user/17438/ 2017-08-28T08:41:33Z https://www.soliforum.com/post/137502/#p137502