SoliForum - 3D Printing Community — Auger bit and motor socket do not align.

Re: Auger bit and motor socket do not align.

2017-08-15T04:20:04Z

Yup, machining error as the machining is done in two operations. Contact us through the Filastruder website's contact form and we'll arrange a replacement.

Re: Auger bit and motor socket do not align.

2017-08-15T01:49:19Z

I see now it is made in one piece from an extrusion .Yes he need to replace the part. The OP knows this as he requested a replacement as well as a couple of washers.

Re: Auger bit and motor socket do not align.

2017-08-15T01:20:23Z

The more I looked at your pics I realized that the alum. housing was machined wrong. you'll need to get that replaced, no amount of washers would even come close. lol

Re: Auger bit and motor socket do not align.

2017-08-15T01:18:11Z

mine was the same way, I just placed washers behind the flange to make the shaft perpendicular to the housing. seems to work great for me.

Re: Auger bit and motor socket do not align.

2017-08-14T13:52:21Z

Can you flip the top plate 180 degees ??

Auger bit and motor socket do not align.

2017-08-14T07:02:30Z

We are having problem in the assembly of Filastruder V 2.1. The problem raised with the alignment of auger bit is not going straight into the motor socket. This occurs due to aluminum chassis auger hole is not in the straight position to the motor socket, it deviates from the exact position.

I would like to request a replacement for that. Also, two 1/4" washers are missing.