<![CDATA[SoliForum - 3D Printing Community — Extruder On/Off Heat Setting]]> 2017-05-27T02:27:18Z PunBB https://www.soliforum.com/topic/16460/extruder-onoff-heat-setting/ <![CDATA[Re: Extruder On/Off Heat Setting]]> Ski52 wrote:

I finally got this thing working again...   I used to be able to turn on both extruder & bed temps at the dame time and they both would heat to temp in ~3 min, not so with this new thing I got. The extruder still takes ~ 3min, the bed takes> 35 min, that's with a 350W SuperNight PS!  So, I now turn on the bed and go about my business and come back to print.  Most times, I forget to turn on the extruder, it's very annoying....  There was a setting to not allow the extruder to work unless the temp was up.  I can't remember where it's at... 

Any help is greatly appreciated -
Thanx
Ski

See this post.

http://www.soliforum.com/post/1664/#p1664

]]> https://www.soliforum.com/user/7731/ 2017-05-27T02:27:18Z https://www.soliforum.com/post/135666/#p135666 <![CDATA[Extruder On/Off Heat Setting]]> I finally got this thing working again...   I used to be able to turn on both extruder & bed temps at the dame time and they both would heat to temp in ~3 min, not so with this new thing I got. The extruder still takes ~ 3min, the bed takes> 35 min, that's with a 350W SuperNight PS!  So, I now turn on the bed and go about my business and come back to print.  Most times, I forget to turn on the extruder, it's very annoying....  There was a setting to not allow the extruder to work unless the temp was up.  I can't remember where it's at... 

Any help is greatly appreciated -
Thanx
Ski

]]> https://www.soliforum.com/user/3790/ 2017-05-27T02:05:30Z https://www.soliforum.com/post/135665/#p135665