2017-05-06T12:57:59Z PunBB https://www.soliforum.com/topic/16405/hotend-heatbreak-problems/ About all I know is that the Press temps read way off.  For ABS I recall seeing users running around 250-255.  This would put PLA temps more in the range of 210-215?  You may need to come up with a way to verify the actual temp of your hot end.

]]> https://www.soliforum.com/user/2291/ 2017-05-06T12:57:59Z https://www.soliforum.com/post/135221/#p135221 pla at 190-195 i would set it to 200 and still same problem happens

]]> https://www.soliforum.com/user/16781/ 2017-05-06T12:23:28Z https://www.soliforum.com/post/135219/#p135219 What temp do you have set and what filament?

]]> https://www.soliforum.com/user/2291/ 2017-05-05T02:59:52Z https://www.soliforum.com/post/135178/#p135178 Yup! Anything should I look for? I took it apart and removed the drive gear and spring so I could manually push in the filament and it goes through at first but eventually it stops and I have already unclogged the hotend

]]> https://www.soliforum.com/user/16781/ 2017-05-04T18:40:23Z https://www.soliforum.com/post/135164/#p135164 are the fans in place and working??

]]> https://www.soliforum.com/user/6775/ 2017-05-04T10:12:22Z https://www.soliforum.com/post/135142/#p135142 So I just got a used Press and most of it seems fine except for the fact when ever I push filament through eventually it gets too hot in the heatbreak that I can't push anymore. Is there something I'm missing to the heatbreak like is there any teflon or any way to fix this?

]]> https://www.soliforum.com/user/16781/ 2017-05-04T07:37:57Z https://www.soliforum.com/post/135141/#p135141