2017-05-08T10:39:41Z PunBB https://www.soliforum.com/topic/16293/need-help-to-extrude-nylon-66/ ill try that maybe this can work

]]> https://www.soliforum.com/user/16775/ 2017-05-08T10:39:41Z https://www.soliforum.com/post/135276/#p135276 Thanks that's what I'm going to try...

]]> https://www.soliforum.com/user/16547/ 2017-03-30T00:06:35Z https://www.soliforum.com/post/134109/#p134109 Just wire in an ~18v power supply, or, better yet, solder on a female connector for one if you can. As Tim has mentioned before, the heater band, PID controller, and fans are capable of 18v operation. (The stall board just shaves it down to 12v)

]]> https://www.soliforum.com/user/15360/ 2017-03-29T20:24:48Z https://www.soliforum.com/post/134105/#p134105 Yes, melting temp is higher, have no details about the materials that's why I tried.
guess I will need replace the heater with some fire source or 18V P supply

]]> https://www.soliforum.com/user/16547/ 2017-03-29T17:15:04Z https://www.soliforum.com/post/134101/#p134101 maybe because nylon 6.6 has a melting point 0f 264 deg C

]]> https://www.soliforum.com/user/16373/ 2017-03-29T15:33:21Z https://www.soliforum.com/post/134099/#p134099 I was offered Nylon 6.6 pellets, tried to extrude at max temp approx 235 but nothing out, its not melting I mean looks like I put gravel, removed the nozzle and took me lot of time to clean the gravel oops the nylon pellets.

]]> https://www.soliforum.com/user/16547/ 2017-03-28T18:19:11Z https://www.soliforum.com/post/134083/#p134083