Came across this thread white searching. As far as I can tell, the Junior now requires 3w files, bit that profile doesn't make them. Not having my own copy of S3D to try I couldn't do anything other than ask a friend who had to try the profile and send me the resulting file. He sent me a gcode file, which didn't work.
Die S3D allow saving to the SD card and printing when you have the latest firmware, or is it only by USB?
The Jr always required 3W files. I have firmware 2.2.7 and print by saving to sdcard. In order to save a S3D sliced object for the Jr, ( assuming you ( or your friend ) has the XYZ Printing JR FFF file follow thee procedure in this thread http://www.soliforum.com/topic/16581/ho … -and-print
]]>Die S3D allow saving to the SD card and printing when you have the latest firmware, or is it only by USB?
]]>theanderpp wrote:This is the profile I've been using on my Junior. Works perfect for me.
This profile is the official one?
There would be no official profile. Regardless of brand or model every machine is different due to manufacturing and part variations. The best you can do is get a base profile that sort of works and then tune it to your specific machine. 3D printing is no where near plug and play yet regardless of advertising hype. You will still need to some tuning and tinkering to get them to work.
]]>This is the profile I've been using on my Junior. Works perfect for me.
This profile is the official one?
]]>Thanks!
]]>