<![CDATA[SoliForum - 3D Printing Community — Da Vinci Pro uneven bed]]> 2017-02-06T15:40:51Z PunBB https://www.soliforum.com/topic/16105/da-vinci-pro-uneven-bed/ <![CDATA[Re: Da Vinci Pro uneven bed]]> I had the same - XYZ seems to squeeze out every penny from manufacturing costs! I replaced with Borosilicat glas Heatbed: https://www.amazon.de/dp/B00SWIX0ZY/ref … MybZZ0179X

It got slightly bigger dimensions 213*200*3mm - but you can put it on top of the old glas or mill out the edges of the bed holder to make it fit (this is what I did).

]]> https://www.soliforum.com/user/13821/ 2017-02-06T15:40:51Z https://www.soliforum.com/post/132149/#p132149 <![CDATA[Da Vinci Pro uneven bed]]> Hi,

I have a Da Vinci Pro and had a lot of troubles yet. I did the calibration according to this forum here with a piece of paper, but It looks like the alu bed is bent. Near the edge of the bed, the nozzle has a distance about 0.05mm, where in the middle, the distance to the bed is around 0.3mm. Does anyone else has this problem?

]]> https://www.soliforum.com/user/16130/ 2017-02-05T14:58:46Z https://www.soliforum.com/post/132097/#p132097