I Buy the s3d.. Select the mini W
But the fff profile ist Bad...
The mini Print to fast... I try man setting but.. Nothing
Hit Anyone a good setting for 0,2mm and a good speed and good quality profile for me?

Thanx

If you bought the over priced software and it is not working when it should, then you should contact Simplify3d and ask for help. If they cant help then ask for a full or partial refund. If they say it works and does not then you missed a setting or they are false advertising.

Now my guess is you downloaded, installed, selected your printer, and just loaded a file and printed. If you did then you are at fault. Selecting your printer simply tells the software basic settings like bed size, max temps, max travels and sets the home and center.

For printing settings like speed, layer size, temperatures and so on you still have to calibrate and set those each and every time you load a new roll on the printer. Some models will even require the settings to be changed.

There is no such thing as a plug and play 3d printer and there is no such thing as load and go software for 3d printing.

Thanx