2017-01-10T01:05:35Z PunBB https://www.soliforum.com/topic/16000/sd-card-error/ Bad USB cable, dirty USB sockets, could have just glitched during transfere.

]]> https://www.soliforum.com/user/7731/ 2017-01-10T01:05:35Z https://www.soliforum.com/post/130846/#p130846 I was able to use one of the two cards in the past the other I've never tried in the machine before. I ended up re-running the STL file I wanted to print through xyzware incase something got corrupt and it started working again. I wonder, assuming this was the problem, how a 3W file could end up corrupt and fail to start printing.

]]> https://www.soliforum.com/user/10766/ 2017-01-09T23:59:00Z https://www.soliforum.com/post/130840/#p130840 May be the wrong type card there are 3 of 4 data standards  if the reader is designed for older standards new cards will not work.
There had been a bit of discussion on this . or could be a loose wire or connection.
Have these same cards worked in the past?

]]> https://www.soliforum.com/user/6775/ 2017-01-09T23:02:16Z https://www.soliforum.com/post/130836/#p130836 Hello guys, I'm really really hoping someone can help me. I finally get my Davinci Jr running well and now I'm getting an SD card error. I have tried 3 SD cards all 3 are readable by my PC and will give me a list of the files on the SD card when plugged into the printer. When I select one to print it says "SD card error". I don't know what else to do, I don't want to plug it directly into the printer because then it will harass me to update the printers firmware or do it automatically. If that happens I can't rewrite my chips anymore.

]]> https://www.soliforum.com/user/10766/ 2017-01-09T02:42:15Z https://www.soliforum.com/post/130773/#p130773