2013-03-05T20:29:48Z PunBB https://www.soliforum.com/topic/1596/spare-electronics/ After frying mine, I bought a Sanguinolo from Norcal-Reprap on ebay, and it was great.

]]> https://www.soliforum.com/user/192/ 2013-03-05T20:29:48Z https://www.soliforum.com/post/15147/#p15147 Soldering is not problem for me.
About a couple of additional drivers i thought also.

]]> https://www.soliforum.com/user/683/ 2013-03-05T16:59:10Z https://www.soliforum.com/post/15119/#p15119 Yes it will work, but you need the full thing which costs 70 or 100$ (unless you want to do all the soldering yourself). Personally,  I would buy a spare ATMega1284 instead (10$, and actually you can also directly replace the 644 that you have and keep that as a spare) and maybe an extra Pololu driver (other 10$) as it's unlikely that you will destroy all of them at the same time.

]]> https://www.soliforum.com/user/242/ 2013-03-05T15:45:57Z https://www.soliforum.com/post/15106/#p15106 I immediately thought - what if the failure will center plate printer. Have to wait for a new at least a few weeks.
If you buy a set like this: http://www.ebay.com/itm/Sanguinololu-Re … 3ccb76caf7
It can also be used as a spare part? Visually, I carefully compared, differences from the fee which solidudl put on their printer seems to be no.

]]> https://www.soliforum.com/user/683/ 2013-03-05T14:38:13Z https://www.soliforum.com/post/15102/#p15102