<![CDATA[SoliForum - 3D Printing Community — Bricked Da Vinci 1.1 plus]]> 2016-09-27T00:05:10Z PunBB https://www.soliforum.com/topic/15359/bricked-da-vinci-11-plus/ <![CDATA[Re: Bricked Da Vinci 1.1 plus]]> ive read elsewhere that holding the up and down buttons on the face of the unit while powering it up will bring it to bootloader as well some say left and right held at power up .... worth a try

]]> https://www.soliforum.com/user/7727/ 2016-09-27T00:05:10Z https://www.soliforum.com/post/127164/#p127164 <![CDATA[Re: Bricked Da Vinci 1.1 plus]]> polarnomad wrote:

:-) drop from a second story window would be more fun :-)

LOL, most likely. big_smile

]]> https://www.soliforum.com/user/10399/ 2016-08-13T00:17:37Z https://www.soliforum.com/post/126168/#p126168 <![CDATA[Re: Bricked Da Vinci 1.1 plus]]> :-) drop from a second story window would be more fun :-)

]]> https://www.soliforum.com/user/14938/ 2016-08-12T22:57:55Z https://www.soliforum.com/post/126167/#p126167 <![CDATA[Re: Bricked Da Vinci 1.1 plus]]> If you are feeling adventurous, you could always try swapping out the controller board & firmware for something open source... tongue

]]> https://www.soliforum.com/user/10399/ 2016-08-12T11:25:47Z https://www.soliforum.com/post/126133/#p126133 <![CDATA[Bricked Da Vinci 1.1 plus]]> Hopefully i can recover my bricked 1.1 plus, i reset the chip and the realised that 1.1 plus is not supported with the non OEM firmware.

I would be greatful for any ideas to recover thos unit.

Thanks in advance.

]]> https://www.soliforum.com/user/14938/ 2016-08-12T05:07:46Z https://www.soliforum.com/post/126122/#p126122