2016-08-15T11:14:43Z PunBB https://www.soliforum.com/topic/15331/drv8834-pcb-capacitors/ I don't have it in front of me right now but will take a look later.

]]> https://www.soliforum.com/user/4789/ 2016-08-15T11:14:43Z https://www.soliforum.com/post/126253/#p126253 This is exactly what I guessed from the look and size of the capacitor.
But before soldering I would appreciate an official confirmation. 
If somebody could check the board or if Uriah could confirm, it would be awesome.

]]> https://www.soliforum.com/user/14620/ 2016-08-13T14:16:35Z https://www.soliforum.com/post/126182/#p126182 I put together a test board and I was using a 47 uF (the smaller one) and a 100uF capacitor (larger one) going to the 5V line on the Pi.  Pololu recommends a min. of 47 uF for the stepper driver which is what was used in the prototype board that was posted.

]]> https://www.soliforum.com/user/11821/ 2016-08-12T15:57:59Z https://www.soliforum.com/post/126140/#p126140 Exactly.
I am building my scanner and my pcb.
I had no success with the A4988.
I just received my DRV8834 and will reproduce the new design instead.

]]> https://www.soliforum.com/user/14620/ 2016-08-09T16:41:33Z https://www.soliforum.com/post/126034/#p126034 I don't think he has an actual board on hand, he's trying to duplicate it.  Uriah should chime in on this one.

]]> https://www.soliforum.com/user/1357/ 2016-08-09T13:56:02Z https://www.soliforum.com/post/126029/#p126029 The value should be printed on them.

]]> https://www.soliforum.com/user/7731/ 2016-08-09T11:57:53Z https://www.soliforum.com/post/126026/#p126026 What is the value of the 2 capacitors used in the new pcb diagram. 
The one using the DRV8834 stepper driver.
I identified them in yellow in the following picture.

]]> https://www.soliforum.com/user/14620/ 2016-08-09T11:23:30Z https://www.soliforum.com/post/126021/#p126021