<![CDATA[SoliForum - 3D Printing Community — Best/Easiest E3DV6 mod for 1.0]]> 2016-12-20T08:12:15Z PunBB https://www.soliforum.com/topic/15155/besteasiest-e3dv6-mod-for-10/ <![CDATA[Re: Best/Easiest E3DV6 mod for 1.0]]> I recently designed an E3D mount which also replaces the extruder assembly in one piece which gets rid of all the metal parts making it much lighter ....... http://www.thingiverse.com/thing:1723817

http://i882.photobucket.com/albums/ac28/scobodon/20160816_200820_zpsqpzarh5k.jpg

]]> https://www.soliforum.com/user/6872/ 2016-12-20T08:12:15Z https://www.soliforum.com/post/129445/#p129445 <![CDATA[Re: Best/Easiest E3DV6 mod for 1.0]]> So I printed this carriage http://www.thingiverse.com/thing:1634298 but some how i thought  I should remove the clip for the belt holder since that part didnt print exactly right on one side.. OPPS. anyway to fix that without printing a new carriage? I spend a lot of time removing the supports cause i wasn't sure if it would print right without them. then i cleaned up the part with sandpaper, a rasp and did an vapor bath and it looks nice. first print btw that finished. I really don't want to print for another 7 hours... jsut to go to the hassle again. any ideas?

]]> https://www.soliforum.com/user/15605/ 2016-12-20T07:39:15Z https://www.soliforum.com/post/129444/#p129444 <![CDATA[Re: Best/Easiest E3DV6 mod for 1.0]]> http://soliforum.com/i/?DZePtBT.jpg

Already printed it, just waiting on the Titan to get here.

]]> https://www.soliforum.com/user/7133/ 2016-07-21T02:03:29Z https://www.soliforum.com/post/125316/#p125316 <![CDATA[Re: Best/Easiest E3DV6 mod for 1.0]]> scotthay wrote:

Thanks, I think I will order a Titan and try it then.

They largely say it's the easiest because of this:

http://www.thingiverse.com/thing:1634298


You'll still need to print that.  It replaces your carriage entirely (you'll need the bushings and the circuit board).  The Titan also lets you print TPU filaments / NinjaFlex.


Otherwise everyone seems to use this (OSM's video):
http://www.thingiverse.com/thing:707530


There are some other carriage replacements:
http://www.thingiverse.com/thing:1312890
http://www.thingiverse.com/thing:844221
http://www.thingiverse.com/thing:709228
http://www.thingiverse.com/thing:734876

]]> https://www.soliforum.com/user/9208/ 2016-07-20T16:21:35Z https://www.soliforum.com/post/125300/#p125300 <![CDATA[Re: Best/Easiest E3DV6 mod for 1.0]]> Thanks, I think I will order a Titan and try it then.

]]> https://www.soliforum.com/user/7133/ 2016-07-15T05:08:02Z https://www.soliforum.com/post/125094/#p125094 <![CDATA[Re: Best/Easiest E3DV6 mod for 1.0]]> OMSmedia wrote:

Grab Some coffee...sit back and enjoy.

It's how I did it. 1.0a

https://youtu.be/vX9r4Ncr4dU

Yeah, that's pretty much how I did it.
Although I didn't bother taking the carriage off, just made the cuts with it in place.

]]> https://www.soliforum.com/user/6872/ 2016-07-15T04:13:36Z https://www.soliforum.com/post/125093/#p125093 <![CDATA[Re: Best/Easiest E3DV6 mod for 1.0]]> Grab Some coffee...sit back and enjoy.

It's how I did it. 1.0a

https://youtu.be/vX9r4Ncr4dU

]]> https://www.soliforum.com/user/10570/ 2016-07-15T03:36:29Z https://www.soliforum.com/post/125091/#p125091 <![CDATA[Re: Best/Easiest E3DV6 mod for 1.0]]> Probably the easiest  way to mount an ed3 is  mounting it to a titan extruder.
There has been a fair bit of discussion about this.

]]> https://www.soliforum.com/user/6775/ 2016-07-15T01:27:24Z https://www.soliforum.com/post/125083/#p125083 <![CDATA[Best/Easiest E3DV6 mod for 1.0]]> What is the current best/easiest method of installing an E3DV6 in the 1.0?  I have had one of each (printer & hot end) laying around for a while not doing anything and thought I would try to get it running again (I have added other printers to my inventory since and quit using the 1.0 for a while).

]]> https://www.soliforum.com/user/7133/ 2016-07-15T00:49:55Z https://www.soliforum.com/post/125080/#p125080