1. E3D Volcano hot end with 0.6mm nozzle installed. Hobb goblin drive gear.
2. RUMBA motherboard, genuine from reprap discount with DRV8825 drivers. A large fan is mounted over the board. I will even include some spare drivers.
3. 8mm Y drive rod with high quality roller bearings from McMaster mounted in the frame. These have completely eliminated all Y skip that you sometimes get with the stock machines and 6mm Y drive rods.
4. All GT2 belts, quality 8mm chromed hardened rods from folger tech, and bearings. No stock bushings.
5. Y carriages are the ones Pirvan designed. Lawsy X carriage with the hot end mount that securely clamps the hot end in.
6. Both X and Y motors have been upgraded from the stock models to better models from OMC stepper online for additional torque.
7. Y idlers are my own design (based on Pirvan's) that allow you to tension these with an allen driver to get perfect belt tension.
8. Y direct drive is my own design to integrate with the 8mm roller bearings. This eliminates all Y backlash.
9. Upgraded PSU bolted securely to the back of the printer.
10. Entire frame nicely painted black for a better looking machine.
11. 8mm metal rod for the spool holder (about all the stock rods were good for).
12. Compressible nut on the 5/16” Z rod to minimize backlash, although I don't really feel like it was necessary.
Imgur album showing all angles: http://imgur.com/a/pGHUt
This is basically the ultimate solidoodle printer, and the way I believe they should have made them all. No cheap components here. Asking $500 obo plus shipping, which is a very fair deal seeing as stock Sd4s go for about $350 on ebay all day long. If you were to source all this yourself, it would probably be over $900 and dozens of hours of time to put it all together. I want to sell it, but I don't need to sell it so please don't waste my time with low ball offers. Shipping will probably about $60- $80 for UPS ground and because I have to buy a box since it won't fit in the stock box any more due to the direct Y drive. Buyers option to add shipping insurance and all sales are final, please. Thanks for looking.
]]>