SoliForum - 3D Printing Community — app hangs after "Test"

Re: app hangs after "Test"

2016-06-14T17:46:25Z

I have the same problem.
Sometimes the web server is no longer reachable.

Thank you, Gilberto

Re: app hangs after "Test"

2016-06-14T02:20:04Z

a little poking around has revealed that this freezing primarily seems to occur when i have the 5Mbps (still or video) camera mode selected. I've gotten SOME hangs with lower settings (if i return from setting the resolution and click "Test" too quickly)... but it ALWAYS hangs if 5Mbps is selected. Is that helpful?

Re: app hangs after "Test"

2016-06-14T01:51:51Z

Here's the info copied from my setup screen:
Firmware Version: FreeLSS 1.18
Free Space 4129 MB
Kernel Linux 4.1.19-v7+ #858 SMP Tue Mar 15 15:56:00 GMT 2016 armv7l

I've noticed that hangups are happening frequently... and not just when using the "Test" button... although it reliably hangs at that point. The web app no longer responds and clicking a button ultimately responds with a "Can't open page "192.168.1.230/..." because the server where this page is located isn't responding"

Re: app hangs after "Test"

2016-06-14T00:17:13Z

After downloading the .PNG file, the links no longer work in the user interface? What version of the software are you using?

app hangs after "Test"

2016-06-12T23:15:24Z

downloads the .png but then the web app becomes unresponsive. only cycling power seems to return it to operation. anyone encountered this or have a fix?