Other stuff you might include in a set up:

Acetone
Calipers
Scribe

Optional stuff that has made my life a world easier when printing and cleaning prints:

Dremel
Whiskey (quantity, not quality in this case)

for the filament pulleu you need a 1.5mm hex key

for the rear set screw you need a 2.5 mm hex i recomend a t handel wrench
http://www.parktool.com/uploads/thumbn … 00x700.jpg

For the hot end you ned a 7/32 wrench or a 6.5mm wrench its hard to tell i'm guessing 6.5 mm a 7/32 socket will work the wrenchs are very hard to find and expensive off amazon

A set of tweezers

to remove prints from the bed a pallet knife works very well
http://www.artsupplies.co.uk/img_item/p … ives_1.jpg they come in a variety of sizes and the thickness is 0.2mm
Pallet knives can be fount at most art supply stores

What other tools do you use