<![CDATA[SoliForum - 3D Printing Community — Bed Plate Screws Loose]]> 2016-05-31T03:47:30Z PunBB https://www.soliforum.com/topic/14816/bed-plate-screws-loose/ <![CDATA[Re: Bed Plate Screws Loose]]> Worked great thanks.

In my case the screw just needed to be tightened.

]]> https://www.soliforum.com/user/13355/ 2016-05-31T03:47:30Z https://www.soliforum.com/post/123573/#p123573 <![CDATA[Re: Bed Plate Screws Loose]]> Telemachus wrote:

My right side screw has done the same. Can you get to the spot to glue it by lifting the glass up and out?

Nope the bed has to be removed by taking out the leveling screws and flipped over.

]]> https://www.soliforum.com/user/7731/ 2016-05-30T15:29:16Z https://www.soliforum.com/post/123553/#p123553 <![CDATA[Re: Bed Plate Screws Loose]]> My right side screw has done the same. Can you get to the spot to glue it by lifting the glass up and out?

]]> https://www.soliforum.com/user/13355/ 2016-05-30T15:15:36Z https://www.soliforum.com/post/123551/#p123551 <![CDATA[Re: Bed Plate Screws Loose]]> Yep super glue..

]]> https://www.soliforum.com/user/7731/ 2016-05-17T23:00:28Z https://www.soliforum.com/post/123022/#p123022 <![CDATA[Re: Bed Plate Screws Loose]]> carl_m1968 wrote:

I glued mine.


super glue?

]]> https://www.soliforum.com/user/5990/ 2016-05-17T21:14:32Z https://www.soliforum.com/post/123014/#p123014 <![CDATA[Re: Bed Plate Screws Loose]]> I glued mine.

]]> https://www.soliforum.com/user/7731/ 2016-05-17T21:08:32Z https://www.soliforum.com/post/123012/#p123012 <![CDATA[Bed Plate Screws Loose]]> I was adjusting my bed when I noticed one of the screws was spinning, after disassembling the bed I found the screw that connects under the bed was loose. Anyone else have this issue? I was thinking about super glueing it on.

]]> https://www.soliforum.com/user/5990/ 2016-05-17T19:35:46Z https://www.soliforum.com/post/123002/#p123002