<![CDATA[SoliForum - 3D Printing Community — Filament extrusion stops suddenly during printing by PLA in DaVinci]]> 2016-03-31T08:31:51Z PunBB https://www.soliforum.com/topic/14445/filament-extrusion-stops-suddenly-during-printing-by-pla-in-davinci/ <![CDATA[Filament extrusion stops suddenly during printing by PLA in DaVinci]]> I use a DaVinci 2.0 with repetier firmware with simplify 3D software.

During printing PLA aftere sometimes it just stops extruding the filament. At that time it sounds a bizarre "kot kot kot kot".

I even used a external fan to keep the extruder gear and the point where filament inserts cool enough. I tried to print from 190 to 240 C extruder temperature. Tried a variety of print speed settings. Nothing exactly improves the filament jam. Now what I do, is just pause the printing and taking the filament out, then break the filament head and re insert it again. It works for a while, than again it starts and filament stops extrusion.

Can anyone give a good solution what I may do?

]]> https://www.soliforum.com/user/11871/ 2016-03-31T08:31:51Z https://www.soliforum.com/post/120257/#p120257