<![CDATA[SoliForum - 3D Printing Community — Another one bites the dust]]> 2013-03-19T09:15:59Z PunBB https://www.soliforum.com/topic/1441/another-one-bites-the-dust/ <![CDATA[Re: Another one bites the dust]]> I finally got my new hot end from SD and my printer lives once again. Let's hope the heater lasts longer this time around.

TiM

]]> https://www.soliforum.com/user/891/ 2013-03-19T09:15:59Z https://www.soliforum.com/post/16960/#p16960 <![CDATA[Re: Another one bites the dust]]> i was printing a new extruder with my 9 days old SD2 to fix my mendel and put in a new J-head Mk IV with it.
the heat resistor failed on me before I could get the extruder printed and now I've got 2 non-functional printers sitting around!

]]> https://www.soliforum.com/user/1010/ 2013-03-19T03:10:44Z https://www.soliforum.com/post/16923/#p16923 <![CDATA[Re: Another one bites the dust]]> amen to that. It has been said here  many times , a  resistor was never meant to be a heater.

]]> https://www.soliforum.com/user/574/ 2013-03-19T01:07:17Z https://www.soliforum.com/post/16907/#p16907 <![CDATA[Re: Another one bites the dust]]> IanJohnson wrote:

Would it be good preventative maintenance to pull one of these out and wrap it in some foil or thermal paste?  Would that make any difference in its probably lifespan?

It would probably help, but I bet SD does paste already. I know they have thermal paste in their shop, since it's on the extruder heatsink.

Really the ideal solution is for SD to use dedicated heater cartridges.

]]> https://www.soliforum.com/user/221/ 2013-03-19T00:05:45Z https://www.soliforum.com/post/16903/#p16903 <![CDATA[Re: Another one bites the dust]]> Would it be good preventative maintenance to pull one of these out and wrap it in some foil or thermal paste?  Would that make any difference in its probably lifespan?

]]> https://www.soliforum.com/user/14/ 2013-03-18T23:46:54Z https://www.soliforum.com/post/16901/#p16901 <![CDATA[Re: Another one bites the dust]]> umm Got a novel idea ,SD should furnish a  spare resistor with new printers since that seems to be the part that fails 1st. That would cut down on down time at least.
I  got a spare battery with my calipers, same principle

]]> https://www.soliforum.com/user/574/ 2013-03-18T23:06:52Z https://www.soliforum.com/post/16900/#p16900 <![CDATA[Re: Another one bites the dust]]> These are the right physical size, but require 24v:

http://store.qu-bd.com/product.php?id_product=20

Ideal would be a cartridge heater that's 12v, 25-30w, and 5mm in diameter to fit the SD blocks.

]]> https://www.soliforum.com/user/221/ 2013-03-18T22:35:26Z https://www.soliforum.com/post/16895/#p16895 <![CDATA[Re: Another one bites the dust]]> lawsy wrote:

Their heating resistors is currently a massive issue. I hope it was just a batch problem and we won't see more and more failures.

The problem with the resistors is the variation in the external dimensions, which obviously isn't a QC point in most resistor factories.

If this:

https://encrypted-tbn3.gstatic.com/images?q=tbn:ANd9GcR1qJu_y4LiuJfJi0zSE_tV_0yVg-TKhJZxmL4IMFh75yH5xcAJ

doesn't fit well in the cylindrical hole (duh, it isn't cylindrical) then it will have localized hotspots. Some last longer than others because some fit better than others.

]]> https://www.soliforum.com/user/221/ 2013-03-18T22:27:48Z https://www.soliforum.com/post/16893/#p16893 <![CDATA[Re: Another one bites the dust]]> Their heating resistors are currently a massive issue. I hope it was just a batch problem and we won't see more and more failures.

]]> https://www.soliforum.com/user/51/ 2013-03-18T22:24:39Z https://www.soliforum.com/post/16890/#p16890 <![CDATA[Re: Another one bites the dust]]> Do what i do tell them you know how to weaponize habenjero pepper sauce then offer for a personal visit

]]> https://www.soliforum.com/user/168/ 2013-03-18T22:13:51Z https://www.soliforum.com/post/16888/#p16888 <![CDATA[Re: Another one bites the dust]]> I waited 7 weeks to get the printer and it failed in 16 days of use.Getting really frustrated as I have returned the  failed part. They got it Thursday of last week. I ordered a New hotend on the 12th and its still shows pending .oh yea if your wondering I  have emailed support several times and they say it will be taken care of. But when? So much for 2-3 business days! I guess in my case the squeaky wheel doesn't get the grease.

]]> https://www.soliforum.com/user/574/ 2013-03-18T21:11:16Z https://www.soliforum.com/post/16868/#p16868 <![CDATA[Re: Another one bites the dust]]> satman49 wrote:

SD should " overnight" a replacement.(imho)


this

]]> https://www.soliforum.com/user/55/ 2013-03-18T15:35:10Z https://www.soliforum.com/post/16822/#p16822 <![CDATA[Re: Another one bites the dust]]> I hear you, mine died after 3 days. It's been over three weeks with numerous e-mails. I would have repaired it myself if I'd have known how long it was going to take. On the bright side, the replacement shipped on Friday and is currently at the Los Angeles sorting facility. With luck, I'll have it tomorrow, Tuesday at the latest. You can log into your order page at Solidoodle  and see if they have shipped parts to you yet. I wish I'd have known that 2 weeks ago when I thought the parts were on their way and ran to the mailbox after work each day ;-)

TiM

]]> https://www.soliforum.com/user/891/ 2013-03-18T02:09:10Z https://www.soliforum.com/post/16792/#p16792 <![CDATA[Re: Another one bites the dust]]> You would think that a dead heater  would  be the # 1 concern, since that's the most common issue. SD should " overnight" a replacement.(imho) I have been down over a week now.Very frustrating waiting  for the printer and  then  after just 16 days it fails.oh SD says they will ship me a new one. I returned the old one, they got it Thursday.Should have shipped new one  on Friday.lol I guess I  could fry  eggs on the build platform while I wait.

]]> https://www.soliforum.com/user/574/ 2013-03-17T23:51:09Z https://www.soliforum.com/post/16782/#p16782 <![CDATA[Re: Another one bites the dust]]> iowajames wrote:

Makes me wonder if it is taking a high priority fix like yours this long, how long will it take a low priority fix like a new threaded rod for my z-axis going to take.
Let's hope it is just a mess up in paper work.

You just have to keep reminding them - emails, posts on their Facebook page, etc.

]]> https://www.soliforum.com/user/221/ 2013-03-17T15:10:25Z https://www.soliforum.com/post/16755/#p16755