2016-03-02T01:36:47Z PunBB https://www.soliforum.com/topic/14170/hot-end-not-heating/ check the solution in this thread.
http://www.soliforum.com/topic/12398/fu

]]> https://www.soliforum.com/user/10955/ 2016-03-02T01:36:47Z https://www.soliforum.com/post/118462/#p118462 I have a 1.0A How do I fix my printer?

]]> https://www.soliforum.com/user/10386/ 2016-03-02T00:45:53Z https://www.soliforum.com/post/118449/#p118449 Ah, didn't spot the bit about the mainboard.
Probably not the connectors then.

]]> https://www.soliforum.com/user/6872/ 2016-03-01T09:21:06Z https://www.soliforum.com/post/118400/#p118400 If you're not getting voltage at the motherboard, its not a problem with the connectors. I've recently encountered the same problem as the OP but haven't had a chance to work it through. I read somewhere that it may be a blown inline fuse... they look like a real PIA to replace. This is happening on a 1.0A... is that the same model you have jamp2112?

]]> https://www.soliforum.com/user/6717/ 2016-03-01T08:45:00Z https://www.soliforum.com/post/118399/#p118399 It's a common problem with the black connectors, they're very poor quality.
I removed mine and soldered the wires together.

]]> https://www.soliforum.com/user/6872/ 2016-03-01T08:13:33Z https://www.soliforum.com/post/118398/#p118398 My printers hot end was not heating so I checked the voltage of the white leads on my mother board and my multimeter showed no voltage. Has any had this problem?

]]> https://www.soliforum.com/user/10386/ 2016-03-01T01:41:13Z https://www.soliforum.com/post/118382/#p118382