<![CDATA[SoliForum - 3D Printing Community — Keeping nozzle clean]]> 2016-02-29T04:24:51Z PunBB https://www.soliforum.com/topic/14145/keeping-nozzle-clean/ <![CDATA[Re: Keeping nozzle clean]]> elmoret wrote:

That's not a common problem, you might need to deburr the nozzle. If the hole has a burr, it could cause that. You can deburr it with a deburring tool or a sharp knife.

Thanks,I did think of that and cleaned up the hole, that seemed to make things worse ,as this created  a bevel around the hole .I have fixed that now still getting the build up . Phill

]]> https://www.soliforum.com/user/8887/ 2016-02-29T04:24:51Z https://www.soliforum.com/post/118281/#p118281 <![CDATA[Re: Keeping nozzle clean]]> That's not a common problem, you might need to deburr the nozzle. If the hole has a burr, it could cause that. You can deburr it with a deburring tool or a sharp knife.

]]> https://www.soliforum.com/user/221/ 2016-02-28T07:39:42Z https://www.soliforum.com/post/118201/#p118201 <![CDATA[Keeping nozzle clean]]> I am finding that after 3-4 hours, daggs built up on the nozzle which will eventually stick to the filament and jam the winder tube  .Is this a common problem, can it be avoided ?.Cheers Phill

]]> https://www.soliforum.com/user/8887/ 2016-02-28T04:03:48Z https://www.soliforum.com/post/118189/#p118189