<![CDATA[SoliForum - 3D Printing Community — Help centering a Soli 2 Pro #witsend]]> 2016-01-28T06:10:29Z PunBB https://www.soliforum.com/topic/13539/help-centering-a-soli-2-pro-witsend/ <![CDATA[Re: Help centering a Soli 2 Pro #witsend]]> sometimes when loading an stl to slice you have to use RH graphics screen settings to manually move object where needed for true center print on large objects then slice and save gcode. saving stl dont always save it in position last set

]]> https://www.soliforum.com/user/795/ 2016-01-28T06:10:29Z https://www.soliforum.com/post/115205/#p115205 <![CDATA[Re: Help centering a Soli 2 Pro #witsend]]> need dump area on right side added 9mm. so Y 150 X 159 max. then dump area 150 left

]]> https://www.soliforum.com/user/795/ 2016-01-28T06:03:53Z https://www.soliforum.com/post/115204/#p115204 <![CDATA[Re: Help centering a Soli 2 Pro #witsend]]> Yep! Well...fairly the same.
Just change it and play around to get it spot on. I have modified my machines so much I forget if the mods required changing X/Y dimensions or not. But at least this gives you something to work with.

]]> https://www.soliforum.com/user/4188/ 2016-01-27T23:02:34Z https://www.soliforum.com/post/115186/#p115186 <![CDATA[Re: Help centering a Soli 2 Pro #witsend]]> To the back/close to the power supply end of the box.
So youa re saying to change the X and Y max to be the same?
Thx so much.

]]> https://www.soliforum.com/user/13449/ 2016-01-27T22:54:14Z https://www.soliforum.com/post/115185/#p115185 <![CDATA[Re: Help centering a Soli 2 Pro #witsend]]> Change your Y so that it matches your X and see if that helps.
Is it safe to assume that it is printing too far to the front?

]]> https://www.soliforum.com/user/4188/ 2016-01-27T22:51:02Z https://www.soliforum.com/post/115184/#p115184 <![CDATA[Re: Help centering a Soli 2 Pro #witsend]]> Hi Azerate - Under Printer settings - Printer Shape - we have the following:
Xmin X max (set to 177)
Ymin  Y max (set to 195)
Print area width is 150.

Do we need to adjust one of those?

]]> https://www.soliforum.com/user/13449/ 2016-01-27T22:46:52Z https://www.soliforum.com/post/115183/#p115183 <![CDATA[Re: Help centering a Soli 2 Pro #witsend]]> Open up printer settings to change it.
Under Printer Shape X and Y should read 152.5 under X/Y max and Printer Width. This should at least get you in the ballpark

EDIT: As a side note, if you have any problems and need help troubleshooting, please post here on the forum. We are 24/7 and many of us have literally removed and reinstalled every last part of our printers. We are typically more knowledgeable and eager to help smile

]]> https://www.soliforum.com/user/4188/ 2016-01-27T22:42:06Z https://www.soliforum.com/post/115182/#p115182 <![CDATA[Help centering a Soli 2 Pro #witsend]]> Hi- can anyone assist with how to get a print centered? We have been through all the setup settings (numerous times), have deleted all profiles, reinstalled Repetier V1.6.0, running off COM3, using ABS, but it still prints about 2" off center. We've tried emailing support and tried calling them off and on for weeks now, and getting nowhere.
Any help appreciated!
TIA.

]]> https://www.soliforum.com/user/13449/ 2016-01-27T22:26:25Z https://www.soliforum.com/post/115180/#p115180