SoliForum - 3D Printing Community — Need latest Repetier settings for Printers

Re: Need latest Repetier settings for Printers

2013-02-15T23:08:49Z

Ah,

I setup RH on my surface pro 2 days and used this:
http://dl.dropbox.com/u/90605134/setupR … e_0_82.exe

Re: Need latest Repetier settings for Printers

2013-02-15T22:52:28Z

Thanks!

Sorry. I meant the definitions of each Printer in Repetier Host, not the Printer definitions in Slic3r. I can find the Slic3r files just fine. Things like bed dimensions, dump areas, etc.

Re: Need latest Repetier settings for Printers

2013-02-15T20:20:27Z

They can be found here: http://www.solidoodle.com/2012/11/1495/

Re: Need latest Repetier settings for Printers

2013-02-15T20:18:30Z

You can manually setup your profiles at this point I bet 80). Just look at what each does and fine tune it to your part. Here is what I focus on.

The most important things to take notice of are nozzle size, extrusion with, retraction settings, layer height, perimeters (I stay around .20 for a balance of quality and speed) -- these all have major impacts on the quality of print.

Infill - I always use concentric on top/bot and honeycomb for the inside.

Perimeters- raise this number if you see holes (assuming you properly fixed your file) -- the lower the Layer Height the more you will need. You can also sometime use more perimeters instead of turning on support.

Need latest Repetier settings for Printers

2013-02-15T18:19:33Z

I installed Win8 on top of my old Win7 system, and can no longer find my settings for my Repetier Host Printers. I looked everywhere for a file that might contain the settings, but was unsuccessful. Would someone please share those settings (probably best with screen shots)?

I also do not have any current Slic3r settings (although I did manage to find and preserve my older Slic3r settings).

Thanks!