<![CDATA[SoliForum - 3D Printing Community — Print Quality issues]]> 2015-12-21T02:22:19Z PunBB https://www.soliforum.com/topic/13142/print-quality-issues/ <![CDATA[Re: Print Quality issues]]> Carl- Moire is possible on all printers, but is more present on machines with a metal hotend.

It can be eliminated with the mods wardjr listed. I have installed everything he mentioned and can firmly say that if there is still a hint of moire, a simple VREF tweak will destroy moire even at .3951 layer height.

EDIT: OP it also seems you are overextruding a little. Recalibrate your extruder and double check your layer height. If the first layer has any gaps in extrusion, you need to bring the bed closer. However, if you are overextruding and do close the gap from the bed and nozzle on the first layer, you may experience shifting and failed prints from the nozzle snagging cooled material.

]]> https://www.soliforum.com/user/4188/ 2015-12-21T02:22:19Z https://www.soliforum.com/post/112247/#p112247 <![CDATA[Re: Print Quality issues]]> wardjr wrote:

I think he's referring to the Moire, there are several mods available to eliminate that.
.9 stepper motor
1/32 driver
Hobb Goblin
BulldogXL geared extruder motor
Any of the above will reduce if not completely eliminate Moiré.

Choose your poison wink


Is more of an inherent problem with SD printers? I have yet to see it in any of the 4 or so printers I have owned. All not SD of course...

]]> https://www.soliforum.com/user/7731/ 2015-12-21T00:59:01Z https://www.soliforum.com/post/112242/#p112242 <![CDATA[Re: Print Quality issues]]> I think he's referring to the Moire, there are several mods available to eliminate that.
.9 stepper motor
1/32 driver
Hobb Goblin
BulldogXL geared extruder motor
Any of the above will reduce if not completely eliminate Moiré.

Choose your poison wink

]]> https://www.soliforum.com/user/2291/ 2015-12-21T00:34:19Z https://www.soliforum.com/post/112240/#p112240 <![CDATA[Re: Print Quality issues]]> With the exception of a little over extrusion in the top layer I would call that a good print. What exactly are you calling bad or wanting from your printer?

]]> https://www.soliforum.com/user/7731/ 2015-12-21T00:30:28Z https://www.soliforum.com/post/112239/#p112239 <![CDATA[Print Quality issues]]> http://soliforum.com/i/?EuDlKNi.jpghttp://soliforum.com/i/?DQFigAf.jpghttp://soliforum.com/i/?TTMEAog.jpg

I have adjusted the pots and e-steps.  Are loose belts to blame for the print quality?

]]> https://www.soliforum.com/user/12746/ 2015-12-20T22:33:49Z https://www.soliforum.com/post/112232/#p112232