SoliForum - 3D Printing Community — Windows 10 Drivers

Re: Windows 10 Drivers

2016-01-20T02:16:26Z

Thanks! It functions as it should.

Re: Windows 10 Drivers

2016-01-17T14:21:28Z

Don't know if this is gonna work. If not, PM me andI'll send you a copy. If you can D/L the file rename it from .xxx to .exe.

Re: Windows 10 Drivers

2016-01-16T05:58:23Z

Hey, can you post this driver online? Mega or something? I believe I'm having the same issue.

Re: Windows 10 Drivers

2015-12-22T20:58:04Z

The file I have is very small. I'll send you a copy if ya want.
PM me with your E
Ski

Re: Windows 10 Drivers

2015-12-22T06:05:13Z

Ski52 wrote:

I ran the original 0.85 version from Solidoodle to set some basic parameters, then loaded and am running 1.6.0 from RH with no problems. I update the machines whenever an update comes out. Win 7, 8.1 & 10 all are running V1.6.0, the Mac is still in the stone ages with V0.56 - 'the latest version', but it works. There is also a device driver I got from SD called 'serial install' you may try.
Good Luck
Ski

Thanks for the response! I have the same RH versions for my Windows 10 laptop, but I am using a Teensy USB Serial (COM 3) driver. I used your advice and looked online for a 'serial install' and downloaded a couple that I thought would work, but I have used the browse section on the update driver list and no new drivers show up. The results also say that the Teensy USB Serial is the best driver. I go into RH and my printer settings show COM30, COMe, or COM with a chinese symbol.

Re: Windows 10 Drivers

2015-12-19T14:48:17Z

I ran the original 0.85 version from Solidoodle to set some basic parameters, then loaded and am running 1.6.0 from RH with no problems. I update the machines whenever an update comes out. Win 7, 8.1 & 10 all are running V1.6.0, the Mac is still in the stone ages with V0.56 - 'the latest version', but it works. There is also a device driver I got from SD called 'serial install' you may try.

Good Luck
Ski

Windows 10 Drivers

2015-12-18T21:28:11Z

I cannot connect to Repetier, and I am assuming it is because of the drivers. Does anyone know how to find/download the drivers for a Solidoodle printer in Windows 10? I have tried all the suggestions from the solidoodle website on how to select the devices on the computer, but I guess the ones I have installed are not compatible.