SoliForum - 3D Printing Community — Repetier-Host for S2?

Re: Repetier-Host for S2?

2016-04-08T11:50:16Z

Repetier Host settings for Solidoodle 2 on connection tab are:
a. Port: Select the Port designated for your printer
b. Baud Rate: 250,000
c. Stop Bits: 1
d. Parity: None
e. Transfer Protocol: Auto
f. Receive Cache Size: 63
g. Use PingPong Communication: Leave Unchecked

6) Select the Printer Shape Tab. Like The connection tab, once set, you shouldn’t have to mess with the values again. The appropriate values and example are again listed below.
a. Print Area Width: 159mm Home X: Max
b. Print Area Depth: 150mm Home Y: Max
c. Print Area Height: 150mm Home Z: Min
d. Has Dump Area CHECK
e. Dump Area Left: 150
f. Dump Area Front: 0
g. Dump Area Width: 9
h. Dump Area Depth: 150
i. X Min: 0 X Max: 159 Bed Left: 0
j. Y Min: 0 Y Max: 159 Bed Front: 0

Solidoodle 2 Repetier Host instruction in jpg is attached

Re: Repetier-Host for S2?

2015-12-13T19:42:50Z

I did find (after some digging) the recommended S2 settings for RH and got it working, thanks.

Re: Repetier-Host for S2?

2015-12-13T18:53:02Z

Create your own profiles.
Download RH and just enter the information you know and ask about the rest.

Repetier-Host for S2?

2015-12-13T18:15:49Z

Having to rebuild my workstation here, and I have a Solidoodle 2 Pro. I now use Octoprint for my printer but I want to install Repetier-Host and Slic3r on this machine like I had before. Trouble is, I think I downloaded it from solidoodle.com and it was all pre-configured for the S2, and now I can't find it on their site. Any suggestions on what to do next?