SoliForum - 3D Printing Community — temple guardian figurine

Re: temple guardian figurine

2013-03-13T20:02:38Z

sorry.. i just see your post... nice print.. this gold filament is very nice..

for the inconsistencies, it's a bonus of kisslicer... don't know why it do this this... (and it's not only on my model..)

Re: temple guardian figurine

2013-02-22T21:36:12Z

Neat print ysb! This is my first real print sliced in kisslicer.

I let this lady print while I went to work today.

Kisslicer settings: .2 / 120mm / 15% infill / skin thickness .42mm
Octave Gold filament
Printing time: 3h:01m:14s

Most of these inconsistencies in the final print are visible in the RH gcode view (where did these little messes come from?)

Re: temple guardian figurine

2013-02-11T18:04:20Z

thanks, it's only a 0.2mm layer with no finishing... actually i have a problem of banding that just appear from nowhere and i need to resolve it before going further... but i think that 0.1mm layer is just a waste of time apart for very specific model...

0.2mm is a very good compromise between speed and quality

i printed two of this model, one of 120mm and another of 140mm... i will put the 120mm one in my "aceton gaz station" to see the result for this specific model..

for this model at 0.2../ 140mm height/ 0.15% filling , it take something like 5 hours to print...

Re: temple guardian figurine

2013-02-11T17:22:07Z

Dang, ysb, that's sexy... is that at .1mm?

temple guardian figurine

2013-02-10T21:37:28Z

another heroic fantasy statue from my test stock

you can get it from here :

http://www.thingiverse.com/thing:49103

this one is supportless so have fun.. and can be print full size in a S2