Thanks for the help. All new at this.

Well it seems to be printing now...

*fingers crossed*

Thanks for the help.

Boy is the manual method easier!

Think also the little sensor was covered in a layer of plastic.

for me the manual method worked best and was easy to do. the auto calibrate for the da vinci sucked

*fingers crossed*

Thanks for the help.

Boy is the manual method easier!

Think also the little sensor was covered in a layer of plastic.

carl_m1968 wrote:

Manually level your bed per the manual method here on the forums at the top of the XYZ section.

Do I need to get the auto calibrate right first as it keeps coming up with errors or can I just ignore that from now on and just go with the manual method?

you can just ignore it, and go with the manual method.

Manually level your bed per the manual method here on the forums at the top of the XYZ section.

Do I need to get the auto calibrate right first as it keeps coming up with errors or can I just ignore that from now on and just go with the manual method?

Everything was printing fine.

Now nothing seems to want to print.

It goes through the printing motions but no object is made.

I cleaned the printer head and unloaded the cartridge and reloaded it and filament was coming through fine.

So why is it not printing?