<![CDATA[SoliForum - 3D Printing Community — sang board wont flash]]> 2015-10-22T20:47:54Z PunBB https://www.soliforum.com/topic/12566/sang-board-wont-flash/ <![CDATA[Re: sang board wont flash]]> I'm using 1.0.5 bc it was the only one i could find my board on. This is the main reason I'd like to sell the printer


carl_m1968 wrote:
shields1.as wrote:

still won't do it. Not sure what it's deal is

wardjr wrote:

It only flashes what was saved so you've just been reflashing what was previously saved.


Does Arduino show the upload is finished with no errors?

I would also try using an older version of Arduino like 1.0.5 as the newer versions have issue with older hardware such as LCD's and maybe the Sanguino boards.

]]> https://www.soliforum.com/user/7171/ 2015-10-22T20:47:54Z https://www.soliforum.com/post/108125/#p108125 <![CDATA[Re: sang board wont flash]]> shields1.as wrote:

still won't do it. Not sure what it's deal is

wardjr wrote:

It only flashes what was saved so you've just been reflashing what was previously saved.


Does Arduino show the upload is finished with no errors?

I would also try using an older version of Arduino like 1.0.5 as the newer versions have issue with older hardware such as LCD's and maybe the Sanguino boards.

]]> https://www.soliforum.com/user/7731/ 2015-10-21T20:17:08Z https://www.soliforum.com/post/108064/#p108064 <![CDATA[Re: sang board wont flash]]> still won't do it. Not sure what it's deal is

wardjr wrote:

It only flashes what was saved so you've just been reflashing what was previously saved.

]]> https://www.soliforum.com/user/7171/ 2015-10-21T19:36:56Z https://www.soliforum.com/post/108063/#p108063 <![CDATA[Re: sang board wont flash]]> still won't do it. Not sure what it's deal is

wardjr wrote:

It only flashes what was saved so you've just been reflashing what was previously saved.

]]> https://www.soliforum.com/user/7171/ 2015-10-21T19:36:52Z https://www.soliforum.com/post/108062/#p108062 <![CDATA[Re: sang board wont flash]]> It only flashes what was saved so you've just been reflashing what was previously saved.

]]> https://www.soliforum.com/user/2291/ 2015-10-20T22:19:14Z https://www.soliforum.com/post/108031/#p108031 <![CDATA[Re: sang board wont flash]]> just attempted it again. lets hope it works


shields1.as wrote:

Im verifying, haven't been saving. my bad on that

wardjr wrote:

Are you saving and verifying before you click upload?

]]> https://www.soliforum.com/user/7171/ 2015-10-20T20:24:50Z https://www.soliforum.com/post/108027/#p108027 <![CDATA[Re: sang board wont flash]]> Im verifying, haven't been saving. my bad on that

wardjr wrote:

Are you saving and verifying before you click upload?

]]> https://www.soliforum.com/user/7171/ 2015-10-20T20:22:10Z https://www.soliforum.com/post/108026/#p108026 <![CDATA[Re: sang board wont flash]]> Are you saving and verifying before you click upload?

]]> https://www.soliforum.com/user/2291/ 2015-10-20T17:59:06Z https://www.soliforum.com/post/108019/#p108019 <![CDATA[Re: sang board wont flash]]> Is the programmer reporting the upload is done or successful?

]]> https://www.soliforum.com/user/7731/ 2015-10-20T17:09:31Z https://www.soliforum.com/post/108015/#p108015 <![CDATA[Re: sang board wont flash]]> yeah I can tell its the right board and com port. The board makes a different tone once I select the right one. And it all verifies. Is there something I'm missing after I hit upload?

wardjr wrote:

Do you have the correct com port and board selected in the tools drop down?

]]> https://www.soliforum.com/user/7171/ 2015-10-20T16:56:58Z https://www.soliforum.com/post/108014/#p108014 <![CDATA[Re: sang board wont flash]]> Do you have the correct com port and board selected in the tools drop down?

]]> https://www.soliforum.com/user/2291/ 2015-10-20T16:17:21Z https://www.soliforum.com/post/108010/#p108010 <![CDATA[Re: sang board wont flash]]> Don't hold the reset. Just a press is all that is needed.

]]> https://www.soliforum.com/user/4188/ 2015-10-20T16:06:06Z https://www.soliforum.com/post/108007/#p108007 <![CDATA[Re: sang board wont flash]]> tried it still no success.
not sure what I'm doing wrong. I hold the reset button on the board for about 10 sec.s then hit upload. Is that the issue?

AZERATE wrote:

Temp_sensor_0 5 would be correct for an E3D

Also, unless you are dropping in a preassembled hotend, you need to set the max temp to 285c for tightening.

]]> https://www.soliforum.com/user/7171/ 2015-10-20T15:35:09Z https://www.soliforum.com/post/108002/#p108002 <![CDATA[Re: sang board wont flash]]> Temp_sensor_0 5 would be correct for an E3D

Also, unless you are dropping in a preassembled hotend, you need to set the max temp to 285c for tightening.

]]> https://www.soliforum.com/user/4188/ 2015-10-16T21:25:38Z https://www.soliforum.com/post/107813/#p107813 <![CDATA[Re: sang board wont flash]]> You may want to change your title. If the firmware will compile then it will upload. The board does not do any kind of check on it.
So the board is flashing, you are just flashing with incorrect settings as others have pointed.

On most printers the following is correct and should at least get it to run.

#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0 <-------Depends on if a second extruder is present. Then would be 1 as well.
#define TEMP_SENSOR_2 0 <-------Same as SENSOR_1.
#define BED_SENSOR 1

Once you confirm your thermistors are reading around 23c at room temp then you should be ok.

Based on the following code.

// When temperature exceeds max temp, your heater will be switched off.
// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure!
// You should use MINTEMP for thermistor short/failure protection.
#define HEATER_0_MAXTEMP 265
#define HEATER_1_MAXTEMP 265
#define HEATER_2_MAXTEMP 265
#define BED_MAXTEMP 150
#define TEMP_SENSOR_BED 1


Your max extruder temps are set to 265. So you should not get an over temp error at anything below 255. You have to allow a bit of overhead for overshoot during heating.

]]> https://www.soliforum.com/user/7731/ 2015-10-16T20:17:10Z https://www.soliforum.com/post/107808/#p107808